possible sale: 575HP Setup

[Rocco]

GT3076R (0.82ar) - 650€
Repo tubular exhaust manifold - 700€


all the parts are in perfect condition,very few kms as i only use the car the saturdays and always street driving... max boost 2.2Bar,oil in the engine always Motul 300V 5w/40

if someone is interested in something please write me

[A80Avant]

So you are only selling the above parts not the engine itself?

[Rocco]

So you are only selling the above parts not the engine itself?

Do you mean my stock 3b engine or the race engine?

[simon20vq]

Hi Tomas, would the turbo bolt to an rs2 manifold? What do you think would be possible bhp from rs2 setup with your turbo or is the ar so big there would be nothing at the bottom of the rev range? Thanks Sy

[Rocco]

Hi Tomas, would the turbo bolt to an rs2 manifold? What do you think would be possible bhp from rs2 setup with your turbo or is the ar so big there would be nothing at the bottom of the rev range? Thanks Sy

what do you want to mean with RS2 setup? only the manifold?
because with only injectors and few more you would only have like 360hp... with more lag probably.


turbo is K26 flange but with porting job to improve flowing.
if you are really intested to install this turbo it would be better to use the whole kit ,that is cheaper and all are in ver good condition and you would be very happy

it is very easy to make the intake for that setup,i mean the MAF,filter installation. i would show you how is mine

also you can use this turbo with stock rods,pistons..everthing,just like a RS2 or k26/27 setup. only keep the torque in the safe side and i think you could use it with 600nm and 480Hp

[juffu]

I put option on injectors and turbo ^^

[A80Avant]

Do you mean my stock 3b engine or the race engine?

I thought you meant the race engine

[Rocco]

I thought you meant the race engine

for 1300€?

[A80Avant]

Why not? Be brave!

[Rocco]

6 days and everthing will be available to buy

great combo that makes lots of power¡¡

K26 flange ported to improve flow in both turbo hotside and manifold

also i would give for free a T3 mild steel flange (same material as the manifold) for someone who could be interested buying it to use with different flange

[pinotattt]

interested if I find an aby engine

[Rocco]

will you open the engine to make it stronger ?

[pinotattt]

don't know yet, if I find a decent aby will probably run it with standard internals to start off with.

[Rocco]

don't know yet, if I find a decent aby will probably run it with standard internals to start off with.

have a complete AAN engine (block and head with intake manifold,fuel rail,injectors..)

probably main problem is shipping cost to malta?

[pinotattt]

https://maps.google.com.mt/maps?q=Murchante+(Navarra)&ie=UTF-8&hq=&hnear=0xd5a4fb5cc09f07f:0x47f8836501b557a7,Murchante,+Navarra,+Spain&gl=mt&ei=K3UNUZqnGoqWtQbz2YFg&ved=0CIoBELYD

hhhhhhhhhhhhhmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm