You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Nah, power is nothing without control and Tom still uses 205 rubber.
205's not bad if we're talking Durex here. :mischeif:
Lee, have you ever made caliper brackets for UFO to Hispec? Or can you get engineering drawings with the dimensions of the hub bracket spacings, etc?
Also, what material should I be making these from? You're advice would be much appreciated.
Graeme.
94 UrS4 Avant, slowly modding as we go. Now gone replaced with:
2001 S6 Avant, V8 works for me!
6082-T6 ally or a nice steel. Custom brackets not an issue but would need to take my own measurements of the hub first. I don't mess about with spacers and shims to get it to fit but instead prefer to get is spot-on first time around. You need to base it on a disk first though. Either adapt it to a stock disk or design some bells too. What size were your rims again Graeme?
1995 S2 Avant with some upgrades
Designun Limited....
Aerospace, Space and Motorsport Design Consultancy and hardware supply.
Sorry, forgot to add, I will not release drawings of these parts to anyone, especially the newer brackets that reinforce the upright at the same time. I know many try to get these brackets right and don't so I would keep the propietary info to myself. Its not rocket science just protecting my interests.
1995 S2 Avant with some upgrades
Designun Limited....
Aerospace, Space and Motorsport Design Consultancy and hardware supply.
Sorry, forgot to add, I will not release drawings of these parts to anyone, especially the newer brackets that reinforce the upright at the same time. I know many try to get these brackets right and don't so I would keep the propietary info to myself. Its not rocket science just protecting my interests.
Lee, I'm looking at using Audi 314x30 vented disks under the standard 16" Avus rims at the moment, will be going to 18x8's when I've got the spare cash. I'm not sure what offset this disk has, 35mm rings a bell but don't quote me.
You're right to protect your info, I don't have a problem with that at all.
Do you have access to another car with UFO's on it or would you need to see mine?
Graeme
94 UrS4 Avant, slowly modding as we go. Now gone replaced with:
2001 S6 Avant, V8 works for me!
Graeme, if you want a great disc, get a mercedes S500 320x30 disc. it's directionally vented and the braking performance is awesome in comparison with any other disc (Lee's excepted though). They will fit on UFO wheel hubs too, which the Audi 314x30 won't, experience talking here. Not many discs out there that will fit on an UFO wheel hub.
Cheers,
Mihnea
'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment