R-Tech TIG161 AC/DC TIG

[Twenny Benson]

Unfortunately the time has come for me and my much loved TIG to part ways, sadly I don't get the time to use it or work on the cars much anymore

Anyway this is what I have:-

http://www.r-techwelding.co.uk/welding_equipment/Tig_Welder/Tig_Welder_R-Tech_Tig161

Its an R-Tech 160AC/DC (TIG 161) and in all honesty I’d be surprised if it’s even seen an hours use! And even then only very low welding currents and used in a very clean environment. The unit is complete with TIG torch, R Tech Pro foot pedal and earth lead. There are a few minor little scratches on the chassis but nothing to worry about & certainly nothing through to the metal.













I will also throw in all my welding rods:-

About 1KG of 1.0mm 308L Stainless 1m rods
About 1KG of 2.4 & 3.2mm 316L stainless 1m rods
About 50 1/2m 1mm 316mm rods
About 25 1/2m 1.6mm mild steel rods



All my torch spares:-

Number of 1.6mm Red Thoriated tungstens
1x used 2.4mm Red Thoriated tungsten
1x used 1.6mm white zirconiated tungsten
1x used 2.4mm white zirconiated tunsten
1x 1.6mm Gas Lense
1x 2.4mm Gas Lense
1x 1.6mm Std gas collet
1x 2.4mm STd gas collet
Gas Lense ceramics 5,6,7,8
Std gas ceramics 5,6,7
Long, medium & short back caps



Auto helmet & a set of almost new TIG gloves:-



R-Tech supplied argon regulator, dual gas flow meters, bottle key and hoses:-



Remainder of the 2 year warranty, about 12 months now, see the invoice date & serial numbers correspond:-





Warranty is extendable if you want that extra peace of mind:-

http://www.r-techwelding.co.uk/welding_equipment/extended_warranties/R-Tech_Tig161_extended_warranty

So as you can see you basically get everything you need and more to start TIG welding, just add some gas and your away, this is much more than an entry level unit and will be a joy in the hands of a jedi or padawan. It really does punch well above its weight and is a joy to use.

Advertised elsewhere so please register any interest early to not miss out, first to flash the cash gets the deal.

Priced to sell, all in at £750 including delivery to mainland UK, all usually excluded postcodes will be extra. Alternatively this can be tested & collected from Lytham in Lancashire with small discount against the P&P.

Sorry about the pic's, my laptop doesn't seem to get on well with Photobucket

Any questions feel free to PM and I will respond as quickly as possible.

Kind Regards,

Andrew.

[SteveH]

Same outfit I have and it's a great bit of kit for those without access to 3 Phase power. Plenty powerful enough for anything you would want to tackle on the car. Great service from R Tech too if you have any queries/issues.

Good luck with your sale

[Twenny Benson]

Thanks Steve. This is my second R-Tech TIG welder, my first was sold to Error404 on here. I have to echo what Steve said, it is a great piece if kit and plenty powerful for anything you need to do for car bits.

[Twenny Benson]

SOLD. Thanks Guys

[AndyP]

I know I should have got up earlier this morning