Driveshafts and Clutch needed!!!

[Palucha]

In need of:

AAN or 3B clutch and pressure plate!
(PS haven't checked if my gearbox (6speed 01E from 2.5TDI a4 b5) 23 or 24 splines )
Whichever fits.

Driveshafts for 5 lug converted hubs ( front C4 , rear B5 )
(Can be Any that gets through the hub carriers)
Any ABS non ABS to bolt with same gearbox and TDI diff.

Pictures and every little info welcome!
Thanks!

[djh]

aan clutch will fit but won't require a spacer unlike an aby which will. If going aan you get a small bit more space at front of the engine as you can move it back slightly.

I have a pair of front drive shafts from an aby if you require.

[Palucha]

aan clutch will fit but won't require a spacer unlike an aby which will. If going aan you get a small bit more space at front of the engine as you can move it back slightly.

I have a pair of front drive shafts from an aby if you require.

Nice one! PM me with prices regarding your parts. Cheers!

[Palucha]

Clutch anyone? or at least pressure plate?

[Pat D]

I'm pretty sure I still have my ABY pressure plate and flywheel, I'd have to check when I get home though.

[andyg plym]

I have a 3b clutch, pressure plate is fine, I would say the clutch is ok as a stop gap it's worn just above the rivets