Left over from fabricating my breather system, with the exception of the bolts through fuel cell fitting which is Torques UK these are all Chinese made so other than looking OK are of unknown quality.
I have the following.
One meter length of AN 10 Stainless braided hose with a 90 degree fitting on each end, hose made up then not used, £30.
AN 10 90 degree fitting unused, £10.
AN 10 45 degree fitting unused, £10.
AN 10 bolt through male fitting with sealing washers, Torques UK so good quality, unused as new £10.
AN 10 Alloy weld on male fittings, these are decent enough quality had no complaints from the guy who welded one on the cam cover for me. Got Four of these, obviously unused, £5 each.
AN 12 Alloy weld on male fitting, as above, got Two of these, £5 each
AN 12 90 Degree fitting, unused, £10.
All prices plus postage, more than open to doing deals more than one fitting and would let the lot go for say £80 delivered.
I have the following.
One meter length of AN 10 Stainless braided hose with a 90 degree fitting on each end, hose made up then not used, £30.
AN 10 90 degree fitting unused, £10.
AN 10 45 degree fitting unused, £10.
AN 10 bolt through male fitting with sealing washers, Torques UK so good quality, unused as new £10.
AN 10 Alloy weld on male fittings, these are decent enough quality had no complaints from the guy who welded one on the cam cover for me. Got Four of these, obviously unused, £5 each.
AN 12 Alloy weld on male fitting, as above, got Two of these, £5 each
AN 12 90 Degree fitting, unused, £10.
All prices plus postage, more than open to doing deals more than one fitting and would let the lot go for say £80 delivered.
Comment