Going on eBay if there's no interest on here.
Recently repainted RS2 calipers (not big reds - 993's) All seals good and pistons move freely.
RS2 caliper carriers, OE bolts and spacing washers.
Yellow Stuff pads with about 500 miles on them (cost £90)
Braided flexi hoses. New RS2 hardlines are required or new longer flexi hoses to make this plug and play. From memory the hardlines are about £30 a pair. Part numbers 8A0 611 721 and 8A0 611 722.
A pair of A8 314mm disks with about 1.5mm of wear on them and a few other used sets if wanted (probably too heavy to post but can be collected if required)
You can fit these calipers to an S2 using a 304mm A8 disc, or use the 5mm spacers with a 314mm A8 disc. Both options will fit under 16" Avus wheels.
£325 + delivery.
Recently repainted RS2 calipers (not big reds - 993's) All seals good and pistons move freely.
RS2 caliper carriers, OE bolts and spacing washers.
Yellow Stuff pads with about 500 miles on them (cost £90)
Braided flexi hoses. New RS2 hardlines are required or new longer flexi hoses to make this plug and play. From memory the hardlines are about £30 a pair. Part numbers 8A0 611 721 and 8A0 611 722.
A pair of A8 314mm disks with about 1.5mm of wear on them and a few other used sets if wanted (probably too heavy to post but can be collected if required)
You can fit these calipers to an S2 using a 304mm A8 disc, or use the 5mm spacers with a 314mm A8 disc. Both options will fit under 16" Avus wheels.
£325 + delivery.
Comment