ABY chips

[bartieke210]

For sale 3 sets of chips (boost and fuel)

- Ultimot ABY-ADU chips 360BHP 500NM (without resistor & pressure sensor) => 150eur

- ABY chips chipped by the webmaster of s2power.com 285BHP 420NM => 100eur

- ABY chips chipped by unknow 285BHP 420NM => 75eur

They are just laying arround. Want to get rid of them.

[montyrs2]

For sale 3 sets of chips (boost and fuel)

- Ultimot ABY-ADU chips 360BHP 500NM (without resistor & pressure sensor) => 150eur

- ABY chips chipped by the webmaster of s2power.com 285BHP 420NM => 100eur

- ABY chips chipped by unknow 285BHP 420NM => 75eur

They are just laying arround. Want to get rid of them.

Hi whatis the required rest of spec of the engine for these chips. Can the last two be put on a standard engine?

[bartieke210]

The last 2 are for a standard aby engine. The one from ultimot is for aby to adu convertion keepibg the aby exhaust cam.

[montyrs2]

Sorry for all the questions. I've not got into the chipping of S2's yet, are they plug and play into the main board or solder in?

To be honest I don't even know where the ECU is, not got that far yet. Still mostly sorting out the mechanicals.

[bartieke210]

Yes they are plug and play. The ecu sits behind the glovebox on the passenger site. You have to open the ecu where you can find the chips on two parts of the board. The boost chip sits on de board where also the boost sensor is mounted. The fuel chip sits on the other board. They sit on sockets, so you don't have to solder anything. It's very easy

[andy10v]

You normally have to solder sockets to an ABY.

3Bs are socketed from the factory.

[bartieke210]

Really? Woops. Mine was chipped and had sockets. I tought the sockets where standard.

[bartieke210]

Still for sale