UrS6 RS2 Setup for sale

[doncecone]

Hi guys,

I've decided to sell the RS2 setup. It consists of the following parts:

1. K24-7200 - perfect condition.
2. RS2 EM - no cracks
3. RS2 ECU with 4 chips:
a) Standart RS2
b) JN 1,9 Bar - strong at the top and medium torque in the middle
c) Tomash Schmatt - Strong puller in the mid range
d) Revo SMS S chip - strongest of them all. UrS6 makes 300 whp and 505 wNM.
4. 1.9 Bar spring
5. Bosch 440 cc at 3 bar injectors
6. 2,5/3 bar FPR
7. FMIC 6 litter 480x190x65 mm with all silicon hoses, steel V-clamps and metal tubing for plug and play installation

Price for all 1900 Euro without shipping.

Location: Bulgaria Shipping ot EU 20-30-40 Euro.

Attached are pictures of the cooler and the dyne of an UrS6 with these parts installed, RS2 pump, 7A/NM cams and RS2 MAF on SMS S chip.

[StickyWickett]

300hp from RS2'd AAN is that right?

Anyway if it doesn't all sell in one lot I'd like to have the turbo and possibly injectors.

[bartolomeus]

300hp from rs2 setup? It's clearly a typo

[Wrath]

And if you can give me a good price on the intercooler I´ll take that... how is it attached? and no cutting in bumper?
Its a Iveco Daily intercooler correct?

[Wrath]

it´s 300 Wheel Horse Power if you read guys

[bartolomeus]

I stand corrected
If you part them, please let me have 2nd dibs on turbo + injectors...

[pasbogdan]

300whp and 500 wnm is nice But on a b2 chasis

[StickyWickett]

Oi excuse me Bart, first come first served



I hope

[doncecone]

Yes, OEM Iveco Cooler. Very little cutting. Attached with 4 steel plates, 2 can be seen on the pictures, 2 are welded on the tube below the radiator. Radiator is pushes 2 cm back. I can pictures of the cutting and how it is attached. Will PM with price.

[Chuckie]

I'll take the exhaust manifold if your splitting?
Or will that go with the turbo??

[macspring]

When it is sold, which I'm sure it will, can you advise on some more details on the intercooler ?

'Yes, OEM Iveco Cooler'.

Please could you pm me the price for the intercooler and the hoses, if the kit is to be sold separately ?

Thanks on both counts.

[doncecone]

This is the most suitable OEM cooler i could find to fit the car with very easy installation. Very effective and stands right behind the air holes of the fender. Very good quality -80% temperature increase under full boost of 28 psi. Second hand here it cost around 100 euro. Pipes are about 50 euro, hoses about 120 and 20 euro for the clamps. Around 300 euro total. I put mine last month so everything is almost new. Very minimal cutting of the fender.


Sent from my iPhone using Tapatalk

[doncecone]

If you're far away i will advice you on the installation and you cam DIY.


Sent from my iPhone using Tapatalk

[gc77]

I would like the hole kit please. Could you get a quote for shipping please. I will pm you my address.

[Majorcina]

I hope u will answer me soon on pm