Engine is a AAN from an Audi S4, which was fully stripped, cleaned & inspected.
The bores were showing signs of wear, so the block was sent to Rob Walker Eng & over bored & relined, bringing the bore size back to original spec to enable the re-use of the original forged Mahle pistons, which are in excellent condition.
Crank was measured, & within tolerances, polished & re-fitted with RS2 Sputter bearings.
The original rods & pistons were re-fitted with new rings.
Cylinder head is free of cracks, all valve guides were replaced & rebuilt with the orginal valves which were within tolerances.
INC Inlet manifold injectors, alternator
£1000.00
Buyer to collect
The bores were showing signs of wear, so the block was sent to Rob Walker Eng & over bored & relined, bringing the bore size back to original spec to enable the re-use of the original forged Mahle pistons, which are in excellent condition.
Crank was measured, & within tolerances, polished & re-fitted with RS2 Sputter bearings.
The original rods & pistons were re-fitted with new rings.
Cylinder head is free of cracks, all valve guides were replaced & rebuilt with the orginal valves which were within tolerances.
INC Inlet manifold injectors, alternator
£1000.00
Buyer to collect
Comment