Uprated Clutches for 3B and Quattros

[Greg_S]

will there be a bolt on setup available for flywheel clutch etc?

Greg

[aelred]

The clutches are a direct bolt on replacement.

[Doug_RS2]

The clutches are a direct bolt on replacement.

Only For a 3B - ABY/ADUers need a 3B flywheel and need to ditch the spacer ????

[Greg_S]

Yeah I thought that was the case, aelred mentioned the plated flywheel so was wondering if the whole lot can be bought together - New Flywheel, Clutch and any other bits that are needed,

Greg

[zlobo]

i am thinking of this one.. doen any body know where i can find a reseler?

[SteveH]

Zlobo, that's the ceramic copper option mentioned above. There is a group buy being arranged at the moment. PM Aelred if you are interested.

Steve

[zlobo]

yes i know a friend of mine is driving with a solid one and it works fine it's like a shachs upated cluch with a stronger organic cluch

[aelred]

As people are getting a little impatient with the clutches I am going to close this group buy tomorrow evening 15th Feb. so if you are not in you have to wait till the next one.

A further group buy can be arranged.

I have enquired with clutchnet regarding alloy flywheels. A soon I have some info I will let you know.

[audiman]

Count me in Aelred, i NEED one. ASAP please mate

[zlobo]

aelred... what is rthe part number for this one at cluch net?

Ceramic copper (with springs)
Lower life 10-50th
Can handle up 700lbs
High abrasion
Harsher engagement

[sla_s2]

i have such clutch on my s2 3b. it is ok for daily driving.

sla s2

i am thinking of this one.. doen any body know where i can find a reseler?

[zlobo]

i´f i am bying only the disk is it posible to use it with a shachs plate?

[A1QSHIP]

I am gathering the parts to replace my clutch disc, cover plate, release bearing, pilot bearing, & clutch slave cylinder. I would also like to replace the rubber line to the clutch slave cylinder too. Does anyone make a stainless steel flex line for this application?

[zlobo]

I am gathering the parts to replace my clutch disc, cover plate, release bearing, pilot bearing, & clutch slave cylinder. I would also like to replace the rubber line to the clutch slave cylinder too. Does anyone make a stainless steel flex line for this application?

i made one steel armed rubber flex line it works fine you get a better fealing on the cluch pedal, but you can also hear a litle noise from the bearing.