Porsche Turbo Front Calipers

[bilko0795]

As per title i have for sale a pair of front calipers from a porsche carrera 4 turbo with decent pads. I have these fitted to my car and are very good at stopping you from to they could do with a refurb if you are fussy there is a bit of marking on the inside of one caliper as shown in the piccy overhaul they are not in bad nick. The part no's end 429/430 they are bigger than the normal porsche upgrade the guy's do on our cars but still use the same brackets that will from VRS supply's.

£350 posted.IMG_1450.jpg

IMG_1451.jpg

IMG_1452.jpg

IMG_1453.jpg

IMG_1455.jpg

IMG_1456.jpg

IMG_1457.jpg

IMG_1454.jpg

[bilko0795]

£325 posted

[nesshead6]

I assume these won't fit under a 16" standard avus wheel?

[bilko0795]

Don't really know i have 17's and they fit ok i'm sure someone on here will know. I also have the rear's that go with these they also take a 330mm disc a few lads have these fitted to S3's and i think they are ok for the front's of our cars i was going to put them on the rear. £265 posted. A few picky's

IMG_1458.jpg IMG_1459.jpg IMG_1460.jpg

IMG_1461.jpg

[Rikki Kitto]

I'll have these off ya fella if they still for sale

[Rikki Kitto]

I've actually got the RS2 set up on mine will these fit this set up or will I need new disks and brackets

[Rusty]

New discs, pads, brackets etc. The 429/430 calipers have a different physical size and mounting hole spacing.

[Rikki Kitto]

Mmmmmm would you say this is an upgrade on what i have then or too similar to be of use

[bilko0795]

These are now sold.

[Rikki Kitto]

[Rikki Kitto]

Thanks for the calipers, bargain, unfortunately VRS don't have the brackets in stock at the minute any ideas where I might get them

[Error404]

What discs are you going to use? I am getting some made for these 429/430s in the near future

[bilko0795]

Thanks for the calipers, bargain, unfortunately VRS don't have the brackets in stock at the minute any ideas where I might get them

Try Kev bambridge directly maybe he has some in stock as he makes them for vrs.

[Rikki Kitto]

What discs are you going to use? I am getting some made for these 429/430s in the near future

330x34 drilled

[Rikki Kitto]

Try Kev bambridge directly maybe he has some in stock as he makes them for vrs.

How to get in touch?