Front Track Rods LHD and RHD cars.
Follow us on Facebook for latest development https://www.facebook.com/AKMotorsport.net
Steering rod set for Audi (B2, B3, B4) Coupe, Quattro, 80/90/Coupe, S2/RS2, etc. 25 mm think tubing like in B Group times to provide strong and precision car handing in the corners under extreme loads.
Rods can be adjusted to fit any suspension settings including longer Audi Sport wishbones.
Fluro tie rod ends will withhold any stress while the car is on the track or bumpy gravel road. Locknuts on every end of the stick will enable precision alignment of the suspension.
All non-OEM parts necessary for the installation are supplied in the kit.
What’s Included:
– One set (two pieces) of front track rods with inox finish
– Four Fluro racing tie rod ends
– Steel machined tie rod end adapters to fit to stock Zwrotnice
– Self-locking nuts
Features:
– Works with stock OEM or Audi Sport wishbones
– 25 mm thick steering rods powder painted in black
– Inox screws for 22 wrench from each side
– Locknuts for securing the Fluro joints
– Galvanized tire rod end adapters for fitting bearing carriers
Rear Track Rods Two versions. For cars with rear ARB and without one.
Rear tie rod set for Audi Quattro (B2/B3/B4) made of 25 mm thick tube – same size as used in the B Group cars. Equipped with Fluro racing joints, spacers and locknuts. It enables very precise setting of rear geometry settings.
It’s a must have for track or race use, as the OEM ones give up in extreme conditions changing your geometry setup, while the car is in the corner.
All non-OEM parts necessary for the installation are supplied in the kit.
What’s included:
– One set (two pieces) of rear black tire rods for rear with inox finish
– Four Fluro racing tie rod ends (left and right threads)
– Steel machined tie rod end adapters to fit stock bearing carriers
– Self-locking nuts
Features:
– Works with stock or Audi Sport wishbones and OEM rear support frame with sway bar
– 25 mm thick rear tire rods powder painted in black
– Inox screws for 22 wrench from each side
– Locknuts for securing the Fluro joints
– Galvanized tire rod end adapters for fitting bearing carriers
Buy them here https://www.akmotorsport.net/product...sion-steering/
Follow us on Facebook for latest development https://www.facebook.com/AKMotorsport.net
Steering rod set for Audi (B2, B3, B4) Coupe, Quattro, 80/90/Coupe, S2/RS2, etc. 25 mm think tubing like in B Group times to provide strong and precision car handing in the corners under extreme loads.
Rods can be adjusted to fit any suspension settings including longer Audi Sport wishbones.
Fluro tie rod ends will withhold any stress while the car is on the track or bumpy gravel road. Locknuts on every end of the stick will enable precision alignment of the suspension.
All non-OEM parts necessary for the installation are supplied in the kit.
What’s Included:
– One set (two pieces) of front track rods with inox finish
– Four Fluro racing tie rod ends
– Steel machined tie rod end adapters to fit to stock Zwrotnice
– Self-locking nuts
Features:
– Works with stock OEM or Audi Sport wishbones
– 25 mm thick steering rods powder painted in black
– Inox screws for 22 wrench from each side
– Locknuts for securing the Fluro joints
– Galvanized tire rod end adapters for fitting bearing carriers
Rear Track Rods Two versions. For cars with rear ARB and without one.
Rear tie rod set for Audi Quattro (B2/B3/B4) made of 25 mm thick tube – same size as used in the B Group cars. Equipped with Fluro racing joints, spacers and locknuts. It enables very precise setting of rear geometry settings.
It’s a must have for track or race use, as the OEM ones give up in extreme conditions changing your geometry setup, while the car is in the corner.
All non-OEM parts necessary for the installation are supplied in the kit.
What’s included:
– One set (two pieces) of rear black tire rods for rear with inox finish
– Four Fluro racing tie rod ends (left and right threads)
– Steel machined tie rod end adapters to fit stock bearing carriers
– Self-locking nuts
Features:
– Works with stock or Audi Sport wishbones and OEM rear support frame with sway bar
– 25 mm thick rear tire rods powder painted in black
– Inox screws for 22 wrench from each side
– Locknuts for securing the Fluro joints
– Galvanized tire rod end adapters for fitting bearing carriers
Buy them here https://www.akmotorsport.net/product...sion-steering/
Comment