C4 UrS4/6, Typ44 ajustable camber/caster top mounts

[Thuppu]

For sale Audi C4(all models) and Typ44 camber/caster plates. Easy to adjust and strong design with uniball bearing, full steel with electro zinc coat. Still lighter than orginal top mounts. Have been tested and proven on street and track.

Two different models, one for stock type big springs with a extra pair of upper spring plates. These will rise the ride height by 20mm(quite easy to compensate by moving the lower spring plates 20mm down) Second model is for coilovers (see pics). Can also be done with custom spring plates, for example for air springs.

Price(for stock springs) 280 euros/kit + shipping

Price(for coilovers) 220 euros/kit + shipping

Black versions + 30 euros.


Some pics...

[orignalS60]

I should have you paid within the next couple of days Thomas.

[diesel des]

These top mounts are a great improvement over stock. I love mine set with extra caster.

Sent from my HTC Desire HD A9191 using Tapatalk 2

[customizer]

They look good!! Do you have any picks installed on a urs4 / urs6 with the suspension as low as it can go? Hoping that these will solve my lack of shock travel on my coilovers w/ 2bennett caster / camber plates. Will they fit bilsten sport struts?

[Thuppu]

I don't have a pic with the susp. set at lowest position, but this is the ride height I use for now.

[customizer]

Hard to tell from pic. Do you think you could measure, your top of tire to the fender? And measure or estimate how much more travel your strut has before the mount contacts the strut housing?

[macspring]

The measurement from the centre of the wheel to the centre of the edge of the arch overhead might be the more useful measurement as it dispenses with the variances from the various tyre and rim sizes

Just a thought.

As you were.

[Thuppu]

From wheel center to the fender, front 325mm and rear 320mm. If you want to go really low then the only way to make more(deeper) suspension travel is to cut the struts and use shorter shock cartridges.

[orignalS60]

Thomas PM'd you and paid for my set of plates.

[Prosac]

Hi Thomas, I would take a Kit for stock Springs.

[Thuppu]

I will PM you with details.

[customizer]

Good call mac spring, that is much more accurate. I just measured mine and I'm running at 314mm. Can you take a peak at the distance your running from the bottom of the upper spring perch to the strut body? Hoping there is more that 12mm there. Let me know, thanks

[Thuppu]

There is something like 20-30mm shock travel left there. For real, there isn't anything you can do about it if you don't shorten the strut housing and use a shorter shock insert.

[Thuppu]

1 kit available for direct shipping. More available on order in 2-3 weeks.

[Prosac]

Thomas, Package arrived. Thank you. ��������