RS2 turbo for sale

[JasonS]

Fitted for 1 month, covered 1000 miles or so, removed so I can take the car back to stock as no one wanted to buy it with the RS2 parts fitted..





£500 + Postage (or collect from North Herts)

Also Delphi Automotive 37lb/hr injectors x 5, close to RS2 spec, Mihnea should be able to do you a chip to work with these.. worked fine in my AAN S6, with Mihnea's generic RS2 chip..



£150 delivered.

[JasonS]

injectors sold.. turbo still available..

[JasonS]

injectors no longer sold due to misunderstanding over flow rate, so all available again..

[Bibby]

How useful are these injectors in comparison with the ABY ones? What's the difference in flow rate?

[rotoryboy]

Hi Karlos, RS2 one are approx 440 cc/min = 42 lb/hr. HTH

[JasonS]

These are 381cc/min = 37.27lb/hr at 3 bar, 441cc/min = 43.04 lb/hr at 4 bar, so very close to RS2..

[Mihnea]

RS2 injectors are 360cc/min...

HTH,

Mihnea

[S2central.net]

Yeah at the reference pressure of 3bar (43.5psi) IIRC - right ?

The RS2 FPR is circa 3.8bar - right ?

Paul

[dan_b]

Can the RS2 turbo be fitted to the standard S2 EM, or is that a stupid thing to be considering?

[Crawford_S2]

Can the RS2 turbo be fitted to the standard S2 EM, or is that a stupid thing to be considering?

I was thinkin this too. Think it fits ok but not ideal AFAIK one of the cylinders runs a bit hot if you use the s2 em. By no means an expert though

[S2 Ant]

yes it fits standard EM but cant run to full potential obviously

[dan_b]

I should stop tormenting myself by asking questions about expensive engine upgrades

[S2 Ant]

LOL i saw this and had to bite my tongue, cos i so wanna do it!!!

Esp after last night some lil saxo was pulling away from me.... altho i later found out its totally stripped out and has a turbo'd lump under the bonnet, but RS2 spec would sort that lil problem out.......... Must Resists...... Muuuuuuuuuuust Resiiiiiiiiiiiiist.

[JasonS]

It's a shame I can't get the RS2 EM off for you guys, then you'd be set..
But sadly it's not moving..

[Bibby]

How far could you take these injectors with a custom remap, compared to the normal ABY ones?

I believe the standard ABY injectors are good for about 320bhp-ish, does that sound about right?