For maximum stealth I'm sticking with four stud hubs on my 80Q so my S2 Coupe hubs are up for grabs.
Their all in good condition having had a couple of coats of POR 15, their fitted with really expensive studs that allow upto a 15mm spacer to be used as well making it much easier to change wheels. I have tapper and conical seat nuts for the studs so you can run stock or aftermarket wheels.
Three of them had new bearings about 20K ago and one has just had a replacment.
They all look like this and will come with the brake heat sheilds, also painted with POR 15.
[img]http://www.s2forum.com/forum/attachment.php?attachmentid=60954&stc1&d=147882346 1[img]
£675 posted to a UK address with the studs and both sets of nuts or £600 without the stud kit.
Postage to the states will be expesive due to weight.
I rebuilt my front calipers with all new seals and painted them black with proper caliper paint, they worked perfectly until I killed my car, £100. Pic's to follow.
I also have a set of Alcon 330 mm front brakes which VolcanoRS rebuilt for me a couple of years ago wilth all new seals and Stainless steel pistons. At the moment their not painted, I had them chemically stripped as opposed to blasted.
The rotors are about worn out but the bells are fine. £300 for the callipers, carriers and bells.
Again pics to follow.
Th
Their all in good condition having had a couple of coats of POR 15, their fitted with really expensive studs that allow upto a 15mm spacer to be used as well making it much easier to change wheels. I have tapper and conical seat nuts for the studs so you can run stock or aftermarket wheels.
Three of them had new bearings about 20K ago and one has just had a replacment.
They all look like this and will come with the brake heat sheilds, also painted with POR 15.
[img]http://www.s2forum.com/forum/attachment.php?attachmentid=60954&stc1&d=147882346 1[img]
£675 posted to a UK address with the studs and both sets of nuts or £600 without the stud kit.
Postage to the states will be expesive due to weight.
I rebuilt my front calipers with all new seals and painted them black with proper caliper paint, they worked perfectly until I killed my car, £100. Pic's to follow.
I also have a set of Alcon 330 mm front brakes which VolcanoRS rebuilt for me a couple of years ago wilth all new seals and Stainless steel pistons. At the moment their not painted, I had them chemically stripped as opposed to blasted.
The rotors are about worn out but the bells are fine. £300 for the callipers, carriers and bells.
Again pics to follow.
Th
Comment