v8 coupe project

[WabTheKing]

Any more details on your brake setup?

I got a master cylinder and servo from a 10v today, vacuum servo fits perfect, and so does the MC but it only has 2 outlets which used to go to the ABS. I had to delete ABS on mine too, but I had 3 brake lines. Had a look through bently and looks like the MC i have is from a 2wd, need a quattro one.

Also, its pretty damn tight round there, master cylinder is almost right up against throttle body hose, you got a picture of what your running for intake plumbing?

Cheers.

Kieron

i have a 4 port MC, i put a bleed nipple in the 4th port on my master cylinder,

i have the same issues with clearance round there, altho im not running a MAF so just had a filter over the TB for the day i ran it.

i was looking at possibly turning the manifold round and having the TB at the front like the RS6 or maybe even fitting an RS6 intake?

or even turning the TB upside down?

still got to fit an intercooler for the SC so i will have this problem with pipe work then.

PITA with RHD, i eventually want to convert mine to LHD
have you thought about putting a motorsport pedal box in with no servo? or maybe installing a remote servo?