Audi GTr project

**Ian Simmonds** · 29 August 2006, 20:37

There's some cracking project cars on here at the moment and I'll watch this one with interest, I seriously considered putting a 20v turbo into a GT in the mid-90's, even to the point of pricing up the bit's, but spent the money on a Ur in the end. I think the old girl will be a bit of a handful, but she'll cope.... Good luck mate, I'm rooting for you

**zlobo** · 1 September 2006, 21:12

just came home from the garage puhhh.
This evening we managed to nearly put the engine in. We have to do some adjustment, so tomorrow it will be in.

**zlobo** · 2 September 2006, 17:39

The engine is in. Now we are facing some other difficulties.. how to fit everything. and missing parts and the wirering ;-)

Lots of modification is necessary to fit everything, when you fix something some otherthing comes up. But however i am off for some (B)

**Nuvo** · 2 September 2006, 18:32

Zlobo, what are the two large bolts sitting on the the wing/fender in the last two pictures? The reason I ask is that I found one of these sitting on the plastic tray below the windscreen on my car and I never new how it got there.

Thats another fantastic project you got there btw. Good luck with getting it all together.

Nuvo.

**zlobo** · 3 September 2006, 01:02

those bolts are for the start motor, and betwen gearbox and engine,

**zlobo** · 10 September 2006, 19:48

Some smal updates i did't have so much time this week to do some work, but i recived the disks and sprayed some body under the car.

**aronmatic2** · 11 September 2006, 17:03

how is your downpipe?

**zlobo** · 11 September 2006, 18:59

somthing like this to start with. and then when i fited every thing i try to make a 3" downpipe this is only 2,5"

Attached Files

20060911.jpg (40.0 KB, 211 views)

**aronmatic2** · 11 September 2006, 19:16

did you try to turn the steering wheel left and right?

**zlobo** · 11 September 2006, 19:21

yes.. there will be a problem with the WG i noticed

i have to think of somthing there

**Jon441cc** · 11 September 2006, 20:08

A ur quattro tie rod would solve the problem as it is bent to accomadate the WG pipe.

**zlobo** · 11 September 2006, 20:15

yes i tr1ed to locate a picture on the ur quattro one..

**aronmatic2** · 11 September 2006, 20:29

heat up the tie rod and bend it. i have done before.
why do you want 3" downpipe. 2.5 is more than enought for 200hp

**Jon441cc** · 11 September 2006, 20:39

404 Not Found

http://www.034motorsport.com/popup_image.php?pID=214&invis=0

**zlobo** · 11 September 2006, 20:40

Originally posted by aronmatic2

heat up the tie rod and bend it. i have done before.
why do you want 3" downpipe. 2.5 is more than enought for 200hp

i will bend it then, 3" for a better spool up and to get lose some of some heat i will put out 260-300hp of this poor engine,

Audi GTr project

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment