My "RS2 project"

[400hp_project]

hi everyone, here i want to present my project with pics, i'll try to explain the best i can too, and i hope you ejoy with it.

Fist pic shows my Coupe S2 in the workshop:



The project begins_



Whitout intakemanifold

[400hp_project]

I show the 2,75inch exhaust system

[400hp_project]

Only the block engine:



the head with valves outside the car:



This photo is the RS" head after i cleaned:

[400hp_project]

The RS2 with the s2 3b intake camshaft:



My car without the engine:



Now some photos i took at the RS2 engine before fit in my car:







Fitting the RS2 engine:

[400hp_project]

This photo shows te engine fitted in my car, with the RS2 intake manifold, and i use the 3b ignition system, thanks to newsh who halped me answering some question about how i can do it:





I fitted the turbo and coolant samco kits in blue as you can see at the pics:





The last photo:

[400hp_project]

The project isn't finished yet, i want to fit this turbo





and i do the porsche 996 conversion:





with S8 rotors



i do it next week, i take more photos.

and other week i fit the v8 rear diff that i bought to jeffer, thanks jeffer.

[couperman]

Looks great! Where did you find the 996/s8 rotor set up? I'm looking to convert my breaks over to that same set up, but I'm scared of the $$$!

[Eriksson]

Nice gooing there.

Do you have problems with your diff ATM ?

Why are you upgrading to a V8 one ?


Cheers

[400hp_project]

Couperman i bought the s8 rotors to an Audi whorkshop, both rotors are new like the 996 calipers.

Eriksson i don't have any problem with my rear diff, i fit the v8 diff because it's an upgrade that people do here i don't know how i an explain you, if everyone could help me, my english isn't very good, sorry.

[Sephiroth401]

Very good coupe RS2 you've done there.

What alloys you got over the big block brakes?

How much time has it taken to get this far?

I see what looks like teardrop mirrors on there, have you done any other mods?

[geryS2]

If i got time and money, I would spend 4 weeks in my garage to do the same !!!

Great job and thanks for the pics !!

[400hp_project]

Very good coupe RS2 you've done there.

What alloys you got over the big block brakes?

How much time has it taken to get this far?

I see what looks like teardrop mirrors on there, have you done any other mods?

I fit de original S4 2.7bitrubo alloys in 17inchs

I spent arround 2 weeks to do itm but it isn't finish yet, i'm waitig for a new ic and i'waiting an answer from mrctuning for the new ecu program. Im going to fit the new turbo next week, i have to do the oil pipes for the new turbo because the original pipes don't fit well.


Thanks geryS2
Other mods i did in my car aprt the RS2 exterir mirorrs are the original RS2 front bomper and rieger side skirt and door panels, i put photos soon

[400hp_project]

Hi to all, i have some news. yesterday, i did the "996 conversion" i put some photos about it:

Before:


After:


The detail:


I bought the brake lines from vagparts, a very good service. Last sunday i fitted the short-shifter kit, form vagparts too, but i didn't took any photo, sorry.

[400hp_project]

I took some photos where you can see the differences betwen the stock turbo and the turbo i'm fitting in my S2: