Man On A Mission!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Azman
    S2Forum Possessed
    • Sep 2005
    • 3205
    • Country: United Kingdom

    #16
    Ar sprung. reduced to £4 so thought I would give it a shot till I can get my hands on some proper stuff. Should do the job better than having nowt there though eh...

    Forgot to say, other CV boot done (damn site easier than the first - now I know fully what I am doing!!!) Here is praying on the oil lines!!
    Dark Grey Avant
    RS2 FARB
    Powerflex Front wishbone bushes
    Alloy Subframe Bushes

    Comment

    • Azman
      S2Forum Possessed
      • Sep 2005
      • 3205
      • Country: United Kingdom

      #17
      Right oil lines on and fit nice and snug! Been for a run and the oil temp stays lower than it used to under some abuse so bonus, down side water temp has risen due to no front rad..... Hope everyone else has this to or is it just me?

      Problem with the brakes which I cant figure out. Both front outer (the side you can see) disc faces are only being half swept by the pads???????? Inner face being fully used, greased everything again, did a full caliper and carrier clean to make sure that there was no brake dust there to get in the way and hey presto still doing it. Getting a really nasty grinding under low level braking too (guessing that it is from the full face not being used). Any ideas chaps as I have done everything I can think of...

      Cheers

      Aaron
      Dark Grey Avant
      RS2 FARB
      Powerflex Front wishbone bushes
      Alloy Subframe Bushes

      Comment

      • s2_bo
        S2Forum Zealot
        • Oct 2005
        • 6067
        • Home: United Kingdom Current: France

        #18
        Aaron,
        What intercooler did you/ are you upgrading too? is it a straight replacement?

        Cheers.
        Bo
        91 S2 coupé - RIP
        98 S8 - Luxury barge

        Comment

        Working...