3b urquattro

[dirtybarry]

hi, thought i would post some pic's of my 3b motor into urquattro conversion that i'm in the middle of. 3b motor is stock but i plan for more power in the near future after the 3b is installed and running well. the quattro is a 1986 wr model.

[dirtybarry]

034 alu flywheel

[dirtybarry]

new 20v rr airbox

[dirtybarry]

i managed to track down a 20v rr intercooler, it ain't much bigger than the stock 10v intercooler but it will do for now.

[dirtybarry]

20v control arms

[dirtybarry]

016 stage 3 clutch

[dirtybarry]

i went for new standard mounts and bushes as the roads over here are harsh.

[dirtybarry]

i've been told that it would be a good idea to change the standard hydro brake servo to one from a 10v kv which is vacum. can anyone give me some info on this, pro's and con's. i can't seem to find any info on this.

[dirtybarry]

just waiting for the reconfigured harness to come back from delta and then i can start putting this baby back together.

[quattrostyle]

nice project, can you post some pictures of the car aswell?

[Greg_S]

Looks like its gonna be quite a few nights in the garage. There are a couple of other UR projects on going on the forum at the moment so it may be worth doing a bit of a search for some info on them

[GT500]

Barry, use the 3b power steering pump, just pipe the small outlet back to the resovour.

Works perfect on mine,

[urquattro-island]

nice

what transmission are you going with??

[dirtybarry]

i'm using the original 016 box from the 10v urquattro, although i will be looking into Torsen V8 rear diff swap in the future. i want to get it finished for a trip to the ring on june 16th. i must get it finished

[dirtybarry]

this is the only pic i have of the car, will get more when i can.