aiming for 700hp

[Jeffer]

what ecu will you be running with that power?

[urquattro-island]

looks

nice that turbo, there is one guy in sweden running 850 hp in and urquattro, with the sportquattrobox..

[eubanks2]

what ecu will you be running with that power?

At the moment, it's running RS2 management on coil packs, but i'm looking into Pectel T6 and maybe 1 other company.

http://www.pectel.co.uk/sub_page.cfm/section/products/editID/14

I can get this ecu, at a fantastic discount.

[repo]

700hp is not that magical, You'll aim for 850 after You 've driven with 700... After that You already know what happens ... :-D

6 spd tranny will take 700hp with no issues. Driveshafts on the other hand don't. I'd say don't even bother to try with stock shafts.

Also, any single plate clutch americans offer You, promising they'll hold, will not. NONE +1000Nm single plate will take the grunt of 700hp inline 5 if it's working even remotely right.

So, look for UK manufactured clutch, if they promise You 1000Nm, it'll do. With UK brands I mean Alcon or Tilton.

Might also mean that american horsies have shorter legs than ours, go figure...

Choose engine management You get proper support with. Make sure Your tuner has time to fine-tune Your maps, not just collect Your money for the system, and then leave You with a bone in Your hand.

Good luck.

Remember, don't do compromises. Any kind. One quid saving may cost thousands worth of damage. Of course You already knew this.

[steverrquattro]

Anyone got any contact details for eubanks2?

[Billman]

Go for Holset HX50 or HX52 billett! Many high hp scandinavian monsters run these.

[terrybullwon]

This thread is 4 years old?

[Rocco]

This thread is 4 years old?

Yes James,older things are always better

[terrybullwon]

Yes James,older things are always better

Thats a lie

[Rocco]

Thats a lie

no no of course,if not take a look to our cars 20 years old¡¡