Breitlings lange Sportquattro

[volcano rs]

Bad news. The Dialynx wings are no longer awailable

Anyone who knows what i need to get the RS2 gearbox fitted?

you'll need 6 speed linkage subframe and transmission tunnel

[Jaap]

RS2 gearbox

The box should fit in a normal Urquattro tunnel.
Do have a CGR in mine...

[breitling]

-Rear diff 4,11:1 from s2 or coupe.
-Gear linkage from RS2 ?
-Driveshaft . RS2 or UR Q? i have urq custom made coilovers
-Propshaft. UR Q ?
-Flywheel and clutch is already on the Adu engine

Anything else?

[Jaap]

-Rear diff 4,11:1 from s2 or coupe.
Did use the S2 and made V8 torsen in it.

-Gear linkage from RS2 ?
Combo of urquattro and AAN/S2 ABY

-Driveshaft . RS2 or UR Q? i have urq custom made coilovers
Want to use the Urq, but is not under the car yet.

-Propshaft. UR Q ?
From Urq.


-Flywheel and clutch is already on the Adu engine
Also a ADU in the car

Anything else?

[breitling]

The box should fit in a normal Urquattro tunnel.
Do have a CGR in mine...

Did you cut or grind anything on top of the tunnel inside the coupe?

[Jaap]

gearbox

Did you cut or grind anything on top of the tunnel inside the coupe?

No, it was not needed

[breitling]

Thanks Jaap

anyone knows where i can get a pair of front carrying joints (traggelenk)?
Maybe these can be taken from cars like passat,santana, audi 80/90 coupe??
I think ebay is the winner here. But maybe some of you "urigurus" know what will fit.

Im not sure its 17 or 19 mm cone-i have to measure that.

[breitling]

Hm... nobody knows what to use? Strange..
Heres some updates: alu engine,diff, subframe and gear mounts. S2 dashboard.. brakes and wheels.
P8190390 (Small).JPG

P8190389 (Small).JPG

P8190392 (Small).JPG

[Jaap]

Uri

Thanks Jaap

anyone knows where i can get a pair of front carrying joints (traggelenk)?
Maybe these can be taken from cars like passat,santana, audi 80/90 coupe??
I think ebay is the winner here. But maybe some of you "urigurus" know what will fit.

Im not sure its 17 or 19 mm cone-i have to measure that.

Breitling is this what you mean??
I have S2 ones on it.

[breitling]

Yes thats whati mean. But i dont have the s2 arms. Sorted it out right now, but thanks anyway.
P8220410 (Small).JPG

P8220412 (Small).JPG

P8220413 (Small).JPG

[Jaap]

Yes thats whati mean. But i dont have the s2 arms. Sorted it out right now, but thanks anyway.
[ATTACH]18108[/ATTACH]

[ATTACH]18109[/ATTACH]

[ATTACH]18110[/ATTACH]

You must make the hole in the (Federbein) a 1mm bigger, than it will fit.
If you use the Uri legs.
Else it will fit one on one.

Greetz Jaap

[breitling]

More updates. Rs2 gearbox fitted together with the engine..
Engine will be remapped with Turbonetics GTK 850 , new cams ++
Its going forward..


P9110455.jpg

P8230423%20%28Small%29.JPG
P9090441.jpg

[breitling]

The fenders arent easy fit Many hours of work to get them fitted....Hopefully i will be satisfied after som more adjustments.
The right side turned out pretty well after some hours but left side isnt good at all.

PA080458.jpg

PA080460.jpg

PA080464.jpg

[G60Rallye]

Looks like you are making some good progress!

Are your wings from Ker by any chance? Mine are the same, right side fits well. The left side is far too short!

[breitling]

Thanks..
Im trying to keep up the faith Yes they are Ker. I had to throw away the rear ones and buy some new ones from another maker.Same with the hood.. Hopefully it will fit better this time.

Also got a boot in carbon made for cooling in the rear
Audi%20deler%20004.jpg

Audi%20deler%20005.jpg