You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
I have brakes now...thanks to Tango23... I started gathering the needed parts for this conversion. I took the 323mm disks (zimermann) for the front. I have a promise from a friend for 2 rs2 replica calipers brackets.
I will let you know how D2 S8 calipers are working into S2 hubs.
About the engine....hmmmm...i don't have the needed parts to build the downpipe.
I have a company which can build the 3" exhaust here....but i cannot transport the car there at this moment and i need that for the dyno.
Can somebody help me with the thread size from the banjo bolts at the kkk turbo water lines?
I try to find a way to fix the turbo oil feed line at my T04E turbo without restrictor.
What flange you used at the oil filter bracket?
Thank you!
Hy! I will go next few weeks at Longlife exhaust here in Romania for my 3" exhaust build....I tried to find some pictures with some exhausts here without too much luck...
Can somebody help me find some pictures with coupe 3" exhaust build...also downpipe? I will have 2 boxes....no cat...but dont know what to do really...
Thank You!
All the best!
Eugen
Most exhaust builders (assuming its a one off) prefer to copy the current exhaust as a pattern and have the car to ensure fitment. Keep the boxes in the same place and just a length of pipe where the cat should be.
Thank You for the answer! I was thinking at that pass were the oem support was under the gearbox...there the oem pipes were squeezed and the diameter was reduced. You guys are not using that support? Thank you!
Eugen
Today i succeded to fit the suspension...i need this to be able to build the exhaust.
The engine, gearbox diff are on the car.
I noticed something during installing the rear shocks....
With the shocks full extended...the driveshafts are touching the subframe.
Is this normal? The rear shocks are supposed to be shorter than the fronts?
Thank You!
Regards!
Eugen
Considering the fact that i have modified my GT into Quattro...is possible that the rear turret height between the GT and Quattro is not the same...soo.. PLEASE!!!! measure for me the rear turret height. At this moment i will be able to rebuild the turrets.
Thank You!
Eugen
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
I started gathering the needed parts for this conversion. I took the 323mm disks (zimermann) for the front. I have a promise from a friend for 2 rs2 replica calipers brackets.
Comment