My 3B-AAN 400 HP project

[Pirvu Eugen]

Hello!
Tring to get the best parts for my engine, i have dismantled 2 3B engines...
Both have the crankshaft noted as 034K...In my list...this one is for 1B, MC engines, the right one for 3B is 034S...
This is right? This means that both off my 3B engines have wrong crank?
I have another crank i dont know from what car is it...Noted 034 A ???
Can you tell me from what engine this is?
What to do?
Thank You!
All the best!
Eugen

[Pirvu Eugen]

About the 034K..i found out that is from the early 3B engines...so is ok.
About the other one..034A dont know...maibe somebody knows more..
Thanks!
Eugen

[Pirvu Eugen]

Time for some update....
Just received the Sport Quattro body kit from Aelred... top service!! Thank You Aelred.
I am still looking for an ECU ... because is verry dificult for me to find a good maper for Motronic near Romania...
Options are welcome!
Thank You!
Eugen

[Pirvu Eugen]

Some pictures with the panels.
I am soo happy!

[Pirvu Eugen]

Succeded to move the car in the new garage... i just whait to start strip her to bare metal...
The new home and some pictures with how she looks now!

[Pirvu Eugen]

Some more with the trunk and some stuff whaiting to be put in...

[Pirvu Eugen]

I was reading about the hall senders and was thinking iff is any downside using the dizzy for the hall signal for my 3B to multicoil setup? I know that the first AAN had Dizzy for the hall signal but, except the space, there is something more involved in the changes made by Audi with the hall senzor mounting position?
Except the startup of the engine, hall signal has something to do with ignition advance during engine running, or for this the ecu use the CPS signal?
The idea is, I really need to move the hall sensor at the cam pulley or will be ok in the dizzy?
Thank You!
Regards!
Eugen

[aelred]

The dizzy is ok to use as a hall effect sender, the ecu will do the actual advancing and retarding of the timing according to load. Once the reference signals have been received on start up the ecu will do the rest

[Acidburn]

As aelred said you can use the dizzy for that function, iirc doug is doing this with the mrc600 as well.

In the picture above showing your engine bay what is the (possible bronze colour) circular object up by the brake fluid reservior? only thing I can think of is just something you've rested there?

[Pirvu Eugen]

As aelred said you can use the dizzy for that function, iirc doug is doing this with the mrc600 as well.

In the picture above showing your engine bay what is the (possible bronze colour) circular object up by the brake fluid reservior? only thing I can think of is just something you've rested there?

Jesus...I should remove that before taking that picture.....
Actualy..is the horn. No place to fit somwere else fast and without mud splashes around. Sounds like an old, tired cow... but working.
Hmmm .. i think i should remove that from the new engine bay.. dont you think?
Eagle eyes Acidburn!!
Thanks for reply!
This is the line to folow then... not bothering too much with the location off the hall signal.
Thanks!
Eugen
Sorry.. i cannot stop laughing!!

[Pirvu Eugen]

Apropos..... that Horn... is there from the first time i put the engine on that car....wy is still shiney and the rest no??
Has actualy 20k km.... hmmmm... what you think? Interesting...

[kwlw]

Apropos..... that Horn... is there from the first time i put the engine on that car....wy is still shiney and the rest no??
Has actualy 20k km.... hmmmm... what you think? Interesting...

It was not covered with grease. You have got a lot of dust from somewhere, which adhered to anything, that was greasy. And in the engine bay, usually almost everything is...

Sau

[Pirvu Eugen]

Thanks!
Will be something to keep away the dust from the engine!

[Acidburn]

I did think it was the horn but wondered why it was up there and even if the bonnet would shut thats why I was curious as to what it was.

Cars coming along well, bet it shifts with the engine in there

[nemilosu]

Thanks!
Will be something to keep away the dust from the engine!

you know about the dust in our city/country.
the solution for keeping away is called "emigration"