URQ + 3B engine to hit 600hp ?

[caddy]

hello all !

after a long time i start to present my URQ project.

start on my black urq

in my hands :

engine 3b
7a cam
tubular exaust manifold
gt3082
scat rod
928 brake
superleggera 8*19" wheels
big intercooler

planed to buy :

all rs2 bearing
rs2 head seal
big injectors
big disque to work with porsche caliper
all cam pulley adjustable
good cluntch

[Acidburn]

Are you going to swap to coil packs to cope with this?

[Puglife]

not sure a GT3082R will flow enough to be capable of a safe and useable 600bhp....

[caddy]

yes 550 hp is the safe power for this turbo.

[caddy]

Are you going to swap to coil packs to cope with this?

are you talking about wheel and shock absorber , or ignition systeme ?

sorry for misunderstanding ....

[Fat Audi 80]

Ignition system. You won't get big power using the distributor. You need to go to ABY or ANN 5 x Coil Ignition or a standalone system...

[Acidburn]

Ignition system. You won't get big power using the distributor. You need to go to ABY or ANN 5 x Coil Ignition or a standalone system...

As steve pointed out

[Puglife]

yes 550 hp is the safe power for this turbo.

Solves my turbo decision issues then lol.

[Jamo]

3082 it can do 575 bhp but because it's a hybrid it can surge like mad ( Garrett don't officially make this turbo )

Careful choice of parts must be taken and damn good tuning!!!

Which size hotsize are you using

[urquattro-island]

i

think its fully possible to put out 600hp on single coil, since jonus and other Norwegians have pushed 700plus on single coil

[Puglife]

3082 it can do 575 bhp but because it's a hybrid it can surge like mad ( Garrett don't officially make this turbo )

Careful choice of parts must be taken and damn good tuning!!!

Which size hotsize are you using

Any more info Jamo??? I'm not looking at as high as 575/600 but don't want surging....

[Jamo]

If you search the net for GT 30/40 or 3082 there's a lot of info on it.

The compressor and hotsize are not well matched but there's no doubting it can make power!

[caddy]

my gt3082 is 0.82 ar turbine size , with a "surge proof" systeme on compressor size.
ball bearing, and water cooling.

[caddy]

think its fully possible to put out 600hp on single coil, since jonus and other Norwegians have pushed 700plus on single coil

do you know wich coil do they use ?

[Jamo]

my gt3082 is 0.82 ar turbine size , with a "surge proof" systeme on compressor size.
ball bearing, and water cooling.

.082 is a lot less likely to surge on them good choice the .63 I wouldn't touch