3b into urquattro conversion, starting problems.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dirtybarry
    S2Forum Addict
    • Jun 2006
    • 282
    • Country: United Kingdom

    #1

    3b into urquattro conversion, starting problems.

    hi,
    the time has come to finally start up my my urquattro 3b conversion and no joy so far. i'm not getting any power to my ignition coil and the fuel pump is not priming when you turn the key. anyone got any ideas of what may be the cause of these problems.

    stephen
    1986 urquattro 20v 3b
  • caterpillar
    S2Forum Fiend
    • Jun 2004
    • 2480

    #2
    have you tryed to switch those 2 violet conectors ... they come from the tranny, if they are switched, you doesent have the ignition signal

    Comment

    • Tonks4x4
      Retired OG Mod
      • Nov 2005
      • 3062
      • Country: United Kingdom

      #3
      Check J17 fuel pump relay. How much of the wiring have you done already????

      Audi Nut!!!

      Comment

      • s2martyn
        Banned
        • Apr 2008
        • 408
        • Country: United Kingdom

        #4
        Originally posted by caterpillar
        have you tryed to switch those 2 violet conectors ... they come from the tranny, if they are switched, you doesent have the ignition signal
        this is only on certain engine looms...i had an issue with this,i put a 10 amp fuse in it...its something to do with ecu switching +

        Comment

        Working...