12 months later......

[Big Lee M]

Sorry I Kent for the rear anti roll bar brackets?

[irishs2]

Very nice work, I love that attention to detail. There is nothing like the rewarding feeling you get when you put that much work into it, and it pays back by driving better than new.

[S-Express]

Excellent work im part way through doing this to mine, where did you get those stands from in the pictures? i need to raise my chasis up for better access.

Chears alex

this is the kiddie: http://garageequipmentgroup.co.uk/item&name=gegmr30
it did blow up on me (literally ) was only the motor filter/capacitor and they sent a new one out straight away.

[S-Express]

Sorry I Kent for the rear anti roll bar brackets?

whiteline rarb + stainless brackets was £172.55 delivered.
car is still comfortable as i retained the stnd springs, but the rarb, poly bushes and koni shocks have transformed the handling - chuffed I can still get the mother in-law in the back with no complaints tho!

[Error404]

Excellent job done properly!

I'm in the middle of doing the same to mine at the moment so full appreciate how much work you've done, especially stripping the underbody, its not a nice job what so ever

whats the deal with the prop alignment tool, where did you find the Audi service info for that mate?

[mcandmar]

Drill it out? I hope it does come out that easy, mine took more work than that

I thought thats where the brackets came from

I havent tried those inner mounts yet, still fighting with an other one trying to get the hub off. ....let just say i bought a big air powered recip saw this morning :mischeif:

Cheers for the pic of the top mount, i think i know what my problem is now..

Mark.

[pixsaudisex2]

good work. have a pat on the back.

[S-Express]

Excellent job done properly!

whats the deal with the prop alignment tool, where did you find the Audi service info for that mate?

section 39-60 of the gearbox CRB pdf file
as below:
(my new engine & box mounts were 15mm higher than the old collapsed versions and what with the new bushes on the diff etc, I found that my prop needed 1mm of adjustment to get it dead straight - probably nothing, but at least I now know its spot on....

[Error404]

Thanks

Can anyone with a Bentley confirm if its the same process for the coupe?

[S-Express]

Thanks

Can anyone with a Bentley confirm if its the same process for the coupe?

you can bet it will be