My Audi S2 600Hp+ project 56k warning

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • blackS2
    replied
    absolutely impressive

    Leave a comment:


  • Słonik
    replied
    Awesome project.
    You a realy good job, perfect fit.
    Nice rims colour
    Cheers!

    Leave a comment:


  • Jonnybravo
    replied
    Looks like a Corsa B column,

    Superb work James, looks like there is a few quids worth of quip going into it !

    Leave a comment:


  • Error404
    replied
    What car is the EPAS out of James? One of the new Vauxhalls?

    Leave a comment:


  • Acidburn
    replied
    Originally posted by terrybullwon
    Thats 100Hp gained

    Yes its a shame i had to cut them i am going to make them so they cover the NACA duct and can be read then.
    Do like a few people have done with there numberplates and made them hollow so to speak with the letters tacked into place over the vents.

    and no worries about the gear shift part, i'll have your other 2 bits soon

    Leave a comment:


  • Rocco
    replied
    awesome James awesome¡

    Leave a comment:


  • terrybullwon
    replied
    Originally posted by smiler
    Nice!!

    She looks dirty though
    It will be

    When it comes back from some paint thats for sure

    Leave a comment:


  • smiler
    replied
    Nice!!

    She looks dirty though

    Leave a comment:


  • terrybullwon
    replied
    Originally posted by Bram
    You need new stickers now

    Looking good James. By the amount of fittings/hoses/lines/tubes it already looks incredible fast
    Thats 100Hp gained

    Yes its a shame i had to cut them i am going to make them so they cover the NACA duct and can be read then.

    Leave a comment:


  • terrybullwon
    replied
    To Start with i will use the Pump and i do not yet know about the sat yet.

    When i put the dry sump in i will gut the water pump if i can prove i can make enough flow with just the electric pump. Maybe just see how well the system works and connect it to a bath tub or swimming pool

    Leave a comment:


  • Bram
    replied
    You need new stickers now

    Looking good James. By the amount of fittings/hoses/lines/tubes it already looks incredible fast

    Leave a comment:


  • nervas
    replied
    Originally posted by terrybullwon
    This should be fine, also i have made a speed controller.

    will you keep the original pump and thermostat?
    I removed wings of original pump and thermostat with electrical pump, but have one problem while cornering high speed 2.3G corners water goes out from water tank

    Leave a comment:


  • terrybullwon
    replied
    Originally posted by terrybullwon

    Also this water pump arrived flows 130lt per minute on full power

    This should be fine, also i have made a speed controller.

    Leave a comment:


  • nervas
    replied
    what water pump will you use?

    Leave a comment:


  • terrybullwon
    replied
    When your girlfriend asks you want you want from your birthday...... Naturally



    A nice AP balance bar adjuster!

    Seat as far back as i can go and this ment welding in a new shifter mount from Acid burn!



    And last front thermostat connector!

    Leave a comment:

Working...