Right got my self an S2 last weekend and going to make it in to a track day car, got alot of plans for this car, which you will see as the project comes together.
DSC00479.jpg
DSC00479.jpg
-
Last edited by trackslag; 3 October 2009, 19:57. -
I have started to lose alot of weight from the slag, when i got the car it had a sub in the boot which with the 2 amps that were bolted to side of it weighed 42kg alone!!!!
DSC00483.jpg
DSC00487.jpgLast edited by trackslag; 3 October 2009, 19:58. -
Today i had got to use my mates work shop so fitted my new omp bucket seats, and put a new steering damper on, which was not a nice job not a great deal of room down the back of the damper.
DSC00495.jpg
DSC00496.jpg
DSC00490.jpg
DSC00491.jpg
DSC00494.jpg
DSC00497.jpg
DSC00499.jpg
DSC00503.jpgLast edited by trackslag; 3 October 2009, 19:56.Comment
-
got myself an bosch 044 and fitted today quite easy job only took 30mins. here some pics
DSC00505.jpg
DSC00506.jpg
DSC00507.jpg
DSC00504.jpg
DSC00508.jpgComment
-
Have you skimmed smth off of that plastic holder or used an original one (if so, then maybe VAG code available?) ?
Comment
-
hello, i got a bosch 040 pump and then went to my local audi garage and got these
Reservoir: 895 201 779 H
Strainer: 895 201 531 A
Adapter (Banjo) N 903 307 01
Sealing Washers (x2) N 013 812 8
M12x1.5 Dome Nut (in place of damper)
i built it up befor i took old one out, the 044 will not fit in the original basket, so you will need above parts.
Last edited by trackslag; 10 October 2009, 18:52.Comment
-
Making good progress there... Have you thought to a false floor on the drivers side ?
I've only got size 8 feet here, but I noticed a helluva drop in comfort to the pedals with the bare floor as the felt and carpet adds nearly an inch. I'm thinking of an alloy plate for mine (nicely drilled & flared) to create a false floor - its pretty common practice in rally cars for example. You can get generic ones from likes of Sparco & OMP but wouldn't be hard to create one from scratch if you wanted.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
Funny you should say that i have size 9 and cant put heels on the floor when i drive really bad think people think i must of just started driving its all abit jeerky.
i picked up some ally other day im goin the make a shelf for my feet to rest on. its that plastic duct under the carpet that drops it down so much. im please you have same prob was starting to think i was small!!
Comment
-
Let me know what thickness you end up for something nice and stiff... It is quite a difference in height there. The other common application you'll see for that alloy plating is to create something for a co-pilot to brace against in the footwell.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
-
i have been looking at these on ebay they seem quite good for the money
http://cgi.ebay.co.uk/NAVIGATORS-CO-...d=p3286.c0.m14Comment
-
nice project and username! This is how i'd love to do it if buying an s2 now. A proper track slag.
Cheers for the 044 info, i'll be doing this next week
S2Forum.com AdministratorComment
-
3 inch full stainless exhaust system
im after a full system for my coupe found one on 034 motor sport but have heard its not the best fitting one on the market. any one got any ideas?Comment
-
Pro speed in Cardiff did mine, speak to Charlie there, he'll do a good job for you.Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
I went to local scrap merchants and picked up a sheet of checker plate for my footwells, £5 for a 3x4 feet sheet, mate cut it with plasma cutter
bolted to floor but with a few nuts under to space it up, I like it and i ve size 10 feetComment
-
[QUOTE=Rusty;447632]Pro speed in Cardiff did mine, speak to Charlie there, he'll do a good job for you.[/QUOTE
how much did they charge? can they do a down pipe aswell?Comment
Comment