Audi S2 trackCar

[Petter S]

91 3B that is going to be a pure trackRacer.
Speclist on engine:

034 Motorsport stag llC Ecu
Garret 3582.82 Ar
034 Header
Wagner innlet
Je pistons
And a hole lot of other parts thats goes inn to a 650+ engine. The list is to long so the details we skip.

Full Rollcage from back to Front.
ApRacing Brakes in front.
V8 gearboks
Rs2 gearlink
Sparco FIA seats
6 point Harness
Summit and Earls An hoses all over.
Fuelcell
Aeromotive fuelpump
E85 fuel

[Petter S]

More pics

[lind4hl]

Awesome!

does the V8 gearbox have Oilcooler, or why an v8 gearbox?

[Petter S]

Bla bla ...

[Petter S]

And som more quality pics

[Petter S]

V8 has oilcooler yes.

[Rusty]

Beast

[trackslag]

love the roll cage is it custm?

[Petter S]

Stage II ECU 4 bar
1 20v 1.8T airtemp sensor
1 flying lead harness stage II c
1 034 header oil and water line kit
1 downpipe I5 20V 034 header
1 header 034 Audi 5 cyl 20VT improved T3
1 head gasket set Audi URS4 AAN
1 head gasket compression dropping
1 boost control valve N75 race
20 titantium valve spring retainers
20 valve spring set high rate Audi 5 cyl 20V
20 light weight hydraulic lifters
1 fuel line kit Audi 5 cyl and universal
1 Audi I5 20V fuel rail AN6
1 Fuel pressure regulator Aeromotive
5 EFI injector connectors
1 6.5" 60-2 trigger wheel
5 high output DIS coils
1 set ignition wire set I5 firewall mounted
1 -6AN fuelfilter combo
1 Garret GT3582 .82 AR , T3, 3" v-band discharge
1 Tial 50mm blow off valve BLACK ( steel flange )
1 Audi external wastegate diaphram
5 75 LB EFI injectors low impedance
1 WG spring 1.9 bar
1 set of ARP flywheelbolts ADU engine
1 kit studs for mounting manifold to head
1 Innovate LC-1
1 kit of ARP mainbearing studs
TRanny/Diff Mounts audi Motor spec : 4
Fiber Glass Sleve an -8 : 2
Cam Gear Autotech : 1
Motor Mount Audi I5 Motor spec : 2
Windage Tray Audi I5 : 1
Crank Pulley cog I5 Super Torque : 1
Universal Hall Sender Raw : 1
EFI Injector Connector : 6
Relay, 30 Amp, 5-pole Dioded : 2
Vacum hose to the stage IIC
AAN TPS connector
10 oversize Exvalves
Jonus Spec cams
Adj Cam sprockets 3
Alu subframe Bushings
Delrin Control Arm Bushings
Sachs Clutch
120 A Bosch dynamo

[Petter S]

love the roll cage is it custm?

Yes it is, tight as possible.

[donce]

what is the weight of the car?

[Petter S]

what is the weight of the car?

Don't know yet. Around 1200-1250kg

Ar AudiRacing here in Norway has a S2 thats 1000 kg

[david]

wow that some car your building there mate,coming along nice

[S2central.net]

Jaysus - the Norwegians do NOT do things by half now do they... All we hear is that taxes, beer and fuel are so expensive in Norway - yet there is a very high proportion of the monster S2/RS2 builds from that part of the world - must be something in the water - LOL. Big project for sure. Good luck with it Petter !

[Petter S]

Jaysus - the Norwegians do NOT do things by half now do they... All we hear is that taxes, beer and fuel are so expensive in Norway - yet there is a very high proportion of the monster S2/RS2 builds from that part of the world - must be something in the water - LOL. Big project for sure. Good luck with it Petter !

Hehe, well E85 is cheap, thow the car uses 30% more fuel . Beer we get from Poland and taxes one can avoid when you work as an electrician .
And when your mates are bilding or have a bad *** Audi it easy to get bitten by the bugg.

The Red one got sold to finance the Black Track car. And a crappy Ps modd.