David's Rs2 Project

[david]

Snake oil...................... if you have an rs2 turbo you can do 380 bhp why worry about the k24?

not at all,i'm just puzzle by the reference made by hoffer76

[Jamo]

a stock k24 can hit 300 bhp, with the rs2 manifold, a bigger intercooler and high boost you could hit those figures

but

a) high EGT's
b) compressor is way outside it map
c) shortened turbo life
d) why pay the money for oldschool kkk technology when garrett / ct / precision ball bearings are out there

Hoffer is changing the compressor wheel, if it's more efficient then you could push near the 315 bhp on paper although hotside is always the limiting factor

[david]

a stock k24 can hit 300 bhp, with the rs2 manifold, a bigger intercooler and high boost you could hit those figures

but

a) high EGT's
b) compressor is way outside it map
c) shortened turbo life
d) why pay the money for oldschool kkk technology when garrett / ct / precision ball bearings are out there

Hoffer is changing the compressor wheel, if it's more efficient then you could push near the 315 bhp on paper although hotside is always the limiting factor

i rest my case

[ranz]

a stock k24 can hit 300 bhp, with the rs2 manifold, a bigger intercooler and high boost you could hit those figures

but

a) high EGT's
b) compressor is way outside it map
c) shortened turbo life
d) why pay the money for oldschool kkk technology when garrett / ct / precision ball bearings are out there

Hoffer is changing the compressor wheel, if it's more efficient then you could push near the 315 bhp on paper although hotside is always the limiting factor

+1
That kind of small kompressor like 7000 and 7200 have... @ drag they make only hot air, nothing more. For street, they are perfect they spool low and make a lot of NM @ low RPM and that makes a lot of people smile

[hoffer76]

most people actually drive there cars on the streets

[ranz]

most people actually drive there cars on the streets

Then why we see over one topic after one... need a bigger turbo
Actually, I do not know why I am pretty happy with my 3B setup. And it´s spools as low it can get

[hoffer76]

not at all,i'm just puzzle by the reference made by hoffer76

which reference David?

[david]

working on some modded k24 7000's at moment should be good for 315bhp with instant spool[/QUOTE] hoffer76

[hoffer76]

finnished working on them now David.

http://www.s2forum.com/forum/showthread.php?t=47254

just putting a standard coupe back together for some dyno results.

[david]

nice one Richard
what turbo are you going to put in this coupe then?

[hoffer76]

only mods for first dyno session will be 1.8t coil conversion, modded k24 7000 and chips.

[david]

only mods for first dyno session will be 1.8t coil conversion, modded k24 7000 and chips.

and what power output are you expecting to get out of this mods 1.8t conversion?

[hoffer76]

expecting 305 and 315 with exhaust and cooler upgrade.

[david]

Richard,what do you think of gt3076r as a upgrade on our Rs2?
and before you say it,yes i'm a speed junky

[A80Avant]

with a 0.63AR nice drivable every day 475+hp car. with 0.82 a bit laggier but more powerfull. Possibly able to make 500+ with somewhat no cyl head improvements, but with use of better EM and rods