J's Unlimited timeattack project 90 saloon

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bram
    S2Forum Fiend
    • Aug 2006
    • 2582
    • Country: Netherlands

    #16
    Originally posted by repo
    I was somewhat lucky, and managed to get some nice goodies today.

    http://promo.pp.fi/temp/90/uusi_hakemisto/
    You got the spark plugs for free I presume? :mischeif:

    Comment

    • repo
      S2Forum Maniac
      • Dec 2004
      • 893
      • Country: Finland

      #17
      used spark plugs. Why would I pay money for such? Although, many of them cost around a 100 eur a piece.

      Pretty rare thread on those, 10x1mm.
      Everything less than 2 bar is considered to be naturally aspirated

      Comment

      • Audi_CQ
        S2Forum Maniac
        • Mar 2004
        • 940
        • Country: Norway

        #18
        Originally posted by repo
        used spark plugs. Why would I pay money for such? Although, many of them cost around a 100 eur a piece.

        Pretty rare thread on those, 10x1mm.
        Any Audi engine type that used such plugs?
        Remember Ford used some 10mm plugs in the BDX, but think they where plugs normally used in motorcycles.

        Comment

        • repo
          S2Forum Maniac
          • Dec 2004
          • 893
          • Country: Finland

          #19
          Imsa and afaik spq
          Everything less than 2 bar is considered to be naturally aspirated

          Comment

          • Error404
            Super Moderator
            • Mar 2007
            • 19789
            • Country: United Kingdom

            #20
            Nice haul of parts there Mr Repo
            I think Nervas was maybe after an Audi sport rack?
            Panthero Coupé quattro 20vt
            Indigo ABY coupé
            Imola B6 S4 Avant

            Comment

            • Nace20
              S2Forum Maniac
              • Jul 2007
              • 721
              • Country: Slovenia

              #21
              pm send for steering rack
              S2 limo

              Comment

              • mcandmar
                S2Forum Zealot
                • Apr 2004
                • 5118
                • Country: Ireland

                #22
                Thats some serious hardware you have there. "insert drooling smiley face"


                At least they went to a good home, cant wait to see this project take shape, keep us posted
                91CQ20v - Gone to a new home
                93UR-S4 - The Magic Carpet
                94S2Bus - The Emerald Express

                Comment

                • repo
                  S2Forum Maniac
                  • Dec 2004
                  • 893
                  • Country: Finland

                  #23
                  Project's been on idle for a while.

                  Got the new clutch last week. Also block is machined, less deck surface, so I need to mill in the rods next week.

                  Hopefully I can get to put the engine together in February.
                  Everything less than 2 bar is considered to be naturally aspirated

                  Comment

                  • repo
                    S2Forum Maniac
                    • Dec 2004
                    • 893
                    • Country: Finland

                    #24
                    Again, too many things to do, too little time.

                    Got pedal assy ready with masters, and the steering column in place. Seat found it's position and the new suspension parts were test fitted on to the body with new height adjustable uniball top mounts.

                    Tops allow us to change ride height for 20mm up and 20mm down in a minute, without touching the spring preload. Eases cornerweight matching.

                    Project will stay on hold for the next few months, as I am moving to US for a while.

                    A couple of photos

                    Everything less than 2 bar is considered to be naturally aspirated

                    Comment

                    • Bram
                      S2Forum Fiend
                      • Aug 2006
                      • 2582
                      • Country: Netherlands

                      #25
                      Nice! small progress = progress

                      Comment

                      • quattro84
                        S2Forum Maniac
                        • Mar 2006
                        • 947
                        • Country: Netherlands

                        #26
                        Top deck of the engine looks interesting. The way you keep the car from rolling as well

                        Comment

                        • Bram
                          S2Forum Fiend
                          • Aug 2006
                          • 2582
                          • Country: Netherlands

                          #27
                          Originally posted by quattro84
                          The way you keep the car from rolling as well
                          Sharp eye! you must dream turbo's every night to spot it

                          Comment

                          • repo
                            S2Forum Maniac
                            • Dec 2004
                            • 893
                            • Country: Finland

                            #28
                            Only good use i found for holset.
                            Everything less than 2 bar is considered to be naturally aspirated

                            Comment

                            • quattro84
                              S2Forum Maniac
                              • Mar 2006
                              • 947
                              • Country: Netherlands

                              #29
                              Originally posted by Bram
                              Sharp eye! you must dream turbo's every night to spot it
                              No i have got so familiair with the sight of looking at those stupid things the entire day...

                              Jyrki i reckon you have misspelled 'CompTurbo' by 'Holset' in your last post

                              Comment

                              • repo
                                S2Forum Maniac
                                • Dec 2004
                                • 893
                                • Country: Finland

                                #30
                                No, I dislike Holsets even more.
                                Everything less than 2 bar is considered to be naturally aspirated

                                Comment

                                Working...