Nissan 200sx S13 with 2.2T 20v audi engine

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Billman
    S2Forum Freak
    • Nov 2004
    • 4129

    #16
    Did you checked the primary trigger Degrees before TDC with a timing light?
    Go Holset or Go RS4

    Comment

    • Bruno
      S2Forum Fanatic
      • Jul 2007
      • 58
      • Country: Norway

      #17
      A Volvo diesel gearbox.
      What is the teoretical top speed?

      Comment

      • button
        S2Forum Fanatic
        • Dec 2007
        • 99
        • Country: Poland

        #18
        Billman
        no
        Couple of engine from me runs on this setup and I don't change it.

        Bruno
        Teoretical and practical top speed on 285/30R18 tires with rev set on 7200rpm is 281km/h
        Audi 90 quattro '88 4.2V8 on VEMS
        Audi S4 C4 Avant 2.2T '92 @ 2,5TDI

        Comment

        • Hortex51
          S2Forum Hobbyist
          • Dec 2009
          • 11
          • Home: Poland Current: Norway

          #19
          Hi guys!

          After a long and painful tuning experience we had with mounting the 01E gearbox, pushing the sh***t out of the car, I've decided to go for 83mm pistons.

          Now...

          As far as I can see, all MLS gaskets are up to 82,5mm. Could you please tell me if OEM Victor Reinz will be sufficient for my bore? Any experience?

          Thanks!!

          Comment

          • Hortex51
            S2Forum Hobbyist
            • Dec 2009
            • 11
            • Home: Poland Current: Norway

            #20
            Car is finally finished.

            Couple of clips:



            http://www.youtube.com/watch?v=5fL-w4yA ... re=related

            FYI, 2nd gear ends at 120 kmh

            Comment

            • djh
              S2Forum Extremist
              • Jun 2011
              • 1622
              • Home: United States Current: United Kingdom

              #21
              First link worked fine and car sounds/looks brilliant, second link don't work unfortunately.

              Comment

              • Billman
                S2Forum Freak
                • Nov 2004
                • 4129

                #22
                nice, did you make another dyno run?
                Go Holset or Go RS4

                Comment

                • Hortex51
                  S2Forum Hobbyist
                  • Dec 2009
                  • 11
                  • Home: Poland Current: Norway

                  #23
                  I know.. second link doesn't work, but it's run #2 - don't know how to edit.

                  Nope, no dyno run yet. But this time we decided to run 1,8 bar all the way to cut off. This way instead of burning rubber, car accelerates... fast

                  Comment

                  • terrybullwon
                    S2Forum Zealot
                    • Mar 2006
                    • 8782
                    • Country: England

                    #24
                    Which gasket did you use in the end?
                    Chef

                    Comment

                    • Hortex51
                      S2Forum Hobbyist
                      • Dec 2009
                      • 11
                      • Home: Poland Current: Norway

                      #25
                      We used an OEM rs2/3b gasket - same part number.
                      However, we used 82,5mm pistons - I mixed the 83mm with our other project... But the gasket works, though it says it's only up to 82mm.

                      Comment

                      • dspl1236
                        S2Forum Addict
                        • Feb 2008
                        • 242
                        • Country: United States

                        #26
                        very nice sir
                        '91 Pearl 3.6 V8 CQ - building
                        '13.5 Jetta GLI - toy
                        '15 Subaru Imprezzzza - work daily
                        hausofdub.com

                        Comment

                        • Hortex51
                          S2Forum Hobbyist
                          • Dec 2009
                          • 11
                          • Home: Poland Current: Norway

                          #27
                          Some latest info.







                          Weight with full tank 1280kg.

                          I need better camshafts, quick

                          Cheers!

                          Comment

                          • Billman
                            S2Forum Freak
                            • Nov 2004
                            • 4129

                            #28
                            niice, did you used the old timing map?
                            Go Holset or Go RS4

                            Comment

                            • Hortex51
                              S2Forum Hobbyist
                              • Dec 2009
                              • 11
                              • Home: Poland Current: Norway

                              #29
                              It was modified a bit. We had to deduct lots of fuel at the top, when we installed the swirl pot. And boost is lower, 1,85 bar.

                              Comment

                              • Hortex51
                                S2Forum Hobbyist
                                • Dec 2009
                                • 11
                                • Home: Poland Current: Norway

                                #30
                                Couple of latest pictures...


                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15

                                Shot at 2011-09-15
                                Last edited by Hortex51; 15 September 2011, 20:10.

                                Comment

                                Working...