could you reveal us then what happens after 5 volts info ?
+400hp ?
Collapse
X
-
-
Not much, same as with a 200/250/300/whatever kPa MAP sensor exceeds 4.8v output signal. If the chip is programmed right, not much will happen.
The problem with 5.2v output range is different, part throttle/idle will be messed up and will require remapping, but WOT will definitely be OK.
This sort of mods are not necessary up to 450-480HP IMHO/IME, and all these power ranges need a real-time emulator to be tuned correctly. Too many fudge factors involved in tuning such cars past 400HP without real-time access and trace functions.
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
-
I run 480 on a stock 3B MAF. Wire is still hangin in there!!sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
-
-
-
Comment
-
This is terrible to watch, if it´s your car howling on rollers..Attached FilesComment
-
It gave only 435hp, should go near 500hp with bigger injectors. We´ll see.... :mischeif:Attached FilesComment
-
Cool, thats great work!! What a result. You must be really happy with itsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Originally posted by audimanCool, thats great work!! What a result. You must be really happy with it
Thank you. Yes, I´m very pleased after four months of mk1 VW golf... Only thing that pisses me off is that friend of mine using bigger injectors got 458hp with GT2871R on RS2. Here´s some poor quality video.
Comment
-
Sounds really good BTW, congrats to you and to Mika!!!
What injectors are you running? RS2?'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
Comment