Audi S2 Coupé -91 - Some fix & Tuning!

[Jaswan]

just had a quote of £50 from a company here in the north east to shorten and balance it. i that its a cheaper option than finding an ABY prop.

keep up the updates Niklas!

[Niklas_S2]

You are running this much power with standard brakes?

Yes, it´s kinda interesting

very nice work!

its awesome that you have done it all yourself too!

Thanks!

Also, how much did you shorten the prop shaft? i am going to get mine shortened.

I shortened mine 30mm.

Doesn't need to me super accurate, to the nearest mm will be fine
You need to get it rebalanced once you've shortened it. I ended up getting mine done by www.firowpropshafts.co.uk

I have not balanced mine. Got it 0,02mm from 0.
Will be fun to see how it works!

[Error404]

Doesn't need to me super accurate, to the nearest mm will be fine
You need to get it rebalanced once you've shortened it. I ended up getting mine done by www.firowpropshafts.co.uk

[Jaswan]

makes sense!

[Error404]

just measure your gearboxes side-by-side

[Jaswan]

Also, how much did you shorten the prop shaft? i am going to get mine shortened.

[Jaswan]

very nice work!

its awesome that you have done it all yourself too!

[Error404]

You are running this much power with standard brakes?

[newsh]

[emoji41]

[Niklas_S2]

Kind of makes me want to start all over again with mine..

Oh Guess it is a good rating

[Niklas_S2]

Must be very loud with no silencer. Absolute beast of a car!

Hmm, I really don´t know yet Probably start on friday....

[newsh]

Kind of makes me want to start all over again with mine..

[Greg_S]

Must be very loud with no silencer. Absolute beast of a car!

[Niklas_S2]

Will the rear diffuser do much for you? Nice work with the exhaust system too, is it a single silencer now?

I guess not, but I just did´nt want a hole in the rear bumper now when i have sidepipe
3,5" with no silencer

[Niklas_S2]

Nice work

Some vids would be good when it's up and running again

Where did you get the propshaft bearing from? Looks beefy.

Thanks!
Bought the propshaft bearing from http://webshop.cp-service.se/sv/8090...r-audi-s2.html