Audi S2 Coupé -91 - Some fix & Tuning!

[Greg_S]

Will the rear diffuser do much for you? Nice work with the exhaust system too, is it a single silencer now?

[quattrostyle]

Nice work

Some vids would be good when it's up and running again

Where did you get the propshaft bearing from? Looks beefy.

[Niklas_S2]

S2-gearbox vs S4-gearbox

[Niklas_S2]

As you might have read, the season was ended because the gearbox threw in the towel...

Got the hold of a 6-speed 01E-gearbox.
It looked pretty ******, so i put in a few hours on it this weekend and here´s the result:


Will be building some new mounts and modify a linkage from an VW Passat 4motion -04.

[quattrostyle]

Awesome car

[Niklas_S2]

Some pics before the gearbox threw in the towel.

[Niklas_S2]

The gearbox threw in the towel last Friday...
So I added about 4 hours to lift the engine out at the evening

A well-known sight...










Thought trying to get hold of an S4 gearbox this winter instead that hopefully will stick together
The enginebay will be painted and also some engine parts that I have not been happy with!
Then I have a diesel crankcase ventilation that enters the sump and will then also check the bearings, etc.

[Niklas_S2]

Even nicer if it's DIY work. Really great looking work. If I put a rollcage I will propably also do it myself.

Exactly
Sounds nice!

[Thuppu]

Even nicer if it's DIY work. Really great looking work. If I put a rollcage I will propably also do it myself.

[Niklas_S2]

Nice. Something like that would be nice on my UrS, but I'll guess you can't get any PnP cages for that chassis. But the idea is nice with the ramovable X-brace. That could be a DIY work.

Thanks!
Yes, It would be nice in any car
This is not a pnp cage though, it was build from scrach.
I´ve heard that some comany in germany (I guess), sells both bolted and welded rollcages for many kind of cars... I can look into that and contact you If I´ll find it!

[Thuppu]

Nice. Something like that would be nice on my UrS, but I'll guess you can't get any PnP cages for that chassis. But the idea is nice with the ramovable X-brace. That could be a DIY work.

[Niklas_S2]

Nice updates. So you have put in a rollcage, any better pics of it? Is it a bolt on or welded permanently.

It´s a screwed rollcage that I can mount or unmount in about 20mins...

[Thuppu]

Nice updates. So you have put in a rollcage, any better pics of it? Is it a bolt on or welded permanently.

[Niklas_S2]

Made som new wishbone bushes last weekend
Pretty big difference in handling because the old one were really bad...







Tadaaa






I was also going through all of my drive shaft joints


A pic from last saturday

[mushasho!]

Festive!

Sent from my HTC One using Tapatalk