S2 Make over

[peter_jensen]

Any one?

Any one?

[_ShurikeN]

Doesn't make sense until You have an A/C compressor.

[peter_jensen]

S2 Make over

Got my car back from paint

[anthonys2]

Will look good once complete but I think you need to do something with the wheels put some 18s on!! I would suggest to go with Audi S8s or BBS

[peter_jensen]

New turbo lack of space

Hi

Will this tight fit give me any kind of trouble thinking of heat transferrer.
I am also thing of making a distends plate between turbo and manifold but I do not know if there is room for it to the chassis.

Thanks
Peter

[macspring]

I presume you have kept some money out of your budget for different rims !

Best wishes.

[peter_jensen]

Yes i got 18" rims thes is my "nice" winter rims

[Rikki Kitto]

Wondering if I am using the correct parts.

My goals is 400-450 Hp and 650Nm

Oem Head gasket is good for Hp/Nm?
Head bolts Victor Reinz Hp/Nm?

Thanks

Isn't there a problem with the length of these head bolts? sure I read on here somewhere that one of them crushes the valve for the oil pressure gauge, I'll try find the thread
Ignore me it's the ARP crank bolts that cause this problem

[amd is the best]

Is the compressor housing touching the manifold or is it just really close (hard to tell from photo)? You could also just clock it a bit more clockwise as the housings usually get smaller.

I ran my K26/GT3076 on the stock 3B manifold and it was very close. I ran it that way for several years without an issue.

[peter_jensen]

That is a pretty good picture. I think that there is room for a 10 mm spacer.

[Thuppu]

Thank you for all the advice.

Master Power is made in Brazil and has nothing to do with cheep China turbo´s.
Master Power is a upcoming brand and is wary good quality.
My friend is agent for Europe so if anyone like to try this turbo let me know.
A new web page is under construction but her is a link to the old one http://powerpage.dk/node/195

Master Power turbos has been available for years here in Finland. There is a thread of them in our finnish forum from 2006. Good turbos for the price.

[peter_jensen]

Immobilizer

Immobilizer

Audi s2 1991

Do any one know this Immobilizer and ware to find a wiring schematic



Thank you in advance

[peter_jensen]

guide pins

Hallo

Haw can I remove these guide pins or do I grind them down?

[nip]

Yep a set of grips and twist whilst pulling

[Error404]