1994 urS4 from downunder!

[jaychen]

here is a few pictures of the car, in my neighbours garage (because it's flat!)



Need to swap the front springs/struts out for the 2Bennet ones I have.





Wiring Mess



What's this vac port used for?



OBD2 connector instead of using the paperclip method?



One of my struts is leaking

[Michael S2]

Nice car. Everyone asks what the vac port is used for (including me), answer - it shouldn't be connected to anything on these cars.

[Thecrispynoodle]

Never plug it. I wondered if it might be an aid to testing for a damaged wastegate diaphragm. You should be able to pressure test it from that port in theory...

[Duffelcoat]

Nice car. Everyone asks what the vac port is used for (including me), answer - it shouldn't be connected to anything on these cars.

I asked the same question and got the same reply too, it is supposed to be like that

[UrS4boy]

That cable is for a Ross-Tech type VAG-Com. The two 2 pin connectors go into the black and white connectors in the Auxiliary Relay Panel 1 box under the bonnet.

http://forums.quattroworld.com/s4s6/msgs/90409.phtml

Left side of the photo.


Remove the lid to find this:

[UrS4boy]

What a dog's breakfast. I don't know what that black box is (aftermarket immobilizer?) but it is fugly. The Central relay panel(<--Click) is supposed to look nice and neat (albeit with a million wires), as shown in the second photo.

[jaychen]

yep you guessed it, aftermarket immob and keyless entry box with relays etc

just put the lowered springs back in the front. It is far to low for my liking, i feel like I am on the ground, scrapes on EVERYTHING.

Anybody interested in a full set of Koni Shocks with Eibach springs , im looking to get something adjustable

[jaychen]

[macspring]

yep you guessed it, aftermarket immob and keyless entry box with relays etc

just put the lowered springs back in the front. It is far to low for my liking, i feel like I am on the ground, scrapes on EVERYTHING.

Anybody interested in a full set of Koni Shocks with Eibach springs , im looking to get something adjustable

Do you guys have speed ramps over there too ?

Interested to see a photo of them when you take them off.

Also interested to see what adjustable springs / shocks you buy.

Thanks, and best wishes.

[jaychen]

Do you guys have speed ramps over there too ?

Interested to see a photo of them when you take them off.

Also interested to see what adjustable springs / shocks you buy.

Thanks, and best wishes.

Yes we do, they are everywhere :-(

I will post one shortly. They are damper adjustable, but not height.

I'll probably buy something from 2Bennet (unless someone else has a good recommendation)

[jaychen]

From Aron?

Previous owner must have had it installed.

[UrS4boy]

From Aron? Previous owner must have had it installed.

Pretty sure that is OE CF from a 93 UrS4 (or special order - didn't show on your build tag). The "tell" is that blue thread throughout the weft/warp. I don't think Aron has done that (yet).

CF trim was available as an option in the years 93 to 97 as far as I know. In North America, we only got it in the 93 UrS4s (like mine).

[jaychen]

Pretty sure that is OE CF from a 93 UrS4 (or special order - didn't show on your build tag). The "tell" is that blue thread throughout the weft/warp. I don't think Aron has done that (yet).

CF trim was available as an option in the years 93 to 97 as far as I know. In North America, we only got it in the 93 UrS4s (like mine).

D,

does yours have a Quattro badge on the belt line trim?

[UrS4boy]

D, does yours have a Quattro badge on the belt line trim?

Yes. They all should.

Details on properly installing the (Audi) badge on the side trim:

http://forums.quattroworld.com/s4s6/msgs/40028.phtml

Details on my RS2'd 93 CF-trimmed, Eibach/Bilstein sport-equipped UrS4:

http://forums.quattroworld.com/s4s6/msgs/196923.phtml

[jaychen]

Mine does not have any of the quattro badges on the interior cf trim.