Hey guys, I just recieved my new tubular header from RS Tuning. Just curious if any of you are using a header from them and if there were any fitment issues? Thanks for any help. 
Elijah
Elijah
-
91 Audi Coupe Quattro- AAN engine transplant -
What is that cover on the exaust? Is it anything termic?Audi 100 TDI :mischeif:
MRC remap; Green Injectors; Champion Sparks; Forge DV 006; Samco Intake pipes; K&N filter
Xenon 6500k; Pillar Boost gauge; Alpine CDA 9835R on Bose with Infinity Sub
Oettinger 8x18" with GS-D3 225/40ZR18; Bilstein with H&R Springs (-40mm)
www.autopamplona.com
www.mrctuning.com -
Look more like dahlback 500HP+ replica.Vadim.
New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !Comment
-
It´s not any coating, just sandblasted iron.Last edited by PekkaS; 22 December 2004, 22:32.Comment
-
Originally posted by bcdesigns
I had it ceramic coated by Swain coatings here in the states.
Elijah91 Audi Coupe Quattro- AAN engine transplantComment
-
So you did it after you took that photo? Because that surface IS only sandblown iron. Here´s something about ceramic coating:
Comment
-
Looks nice.
Can you take some close up pictures of the collector?
Are you happy with it? No warped flanges or anything?
What diameter is the tubing? and are the internals smooth at the welds?
How much was it again?S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Actually, that surface is the ceramic coating. You can see what the headers looked like before coating in this pic:Originally posted by PekkaS
I haven't coated mine yet, and it looks gray like the ones in that pic.Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
Here's a pic of the inside of the collector, from a Garrett version like mine.Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
Another:Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
Again:Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
What material are these made of, I just read the group buy thread for these, did it take six months lead time?
P.S. I like these, they look good.Mark - ModdedComment
-
Last one:Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
Normally they are stainless steel, but our group buy was for regular steel, described as "high pressure pipe" by the Swedish manufacturer.Originally posted by Mark HalliganKenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
-
Has anyone got a picture of one sitting in an S2 or RS2? I want to see where the turbo sits and how much room there is in front of it.
ThanksS2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
Comment