S2 Underground Division from Portugal

[S2_UD]

We've assembled some parts that had arrived some time ago.....

Aluminium control arms:


Control arms/spherical tie rods/KW v3


Front brakes D2 racing 8pot


With 18'' OZ Ultraleggera


Extra parts

[quattrostyle]

Those wishbones look sexy as the rest of the parts do. How are the D2 brakes?

[Rocco]

great job there"


just for curiosity... how much money cost to do that full body paint conversion in Portugal? what amount of work OMG

[Error404]

Paint looks excellent, I look forward to seeing it in the sunlight.
Good luck with the project

[S2_UD]

Those wishbones look sexy as the rest of the parts do. How are the D2 brakes?

My intension is to assemble all the chassis components first, only afterwards move to the engine bay and updated it. Regarding the D2 brakes.... I've not had the chance to drive it properly, because i had assembled the brakes and couple of weeks after i stoped the car and dismantled the all car. The only feedback i have is a friend of mine that have an audi TT 1.8t with GTX35 and the previous D2 model, and the car stops very well with Ferodo DS2500 pads. But when i assembled back i'll give you my feedback

great job there"


just for curiosity... how much money cost to do that full body paint conversion in Portugal? what amount of work OMG

We took off all intirior parts on my shop(seats, dashboard, fuel tank, etc etc )....then on the painting shop they removed the gas door and sunroof, all steel defaults and then painted for almost 2.000€ .

Paint looks excellent, I look forward to seeing it in the sunlight.
Good luck with the project

Thanks. I'm also anxious to move forward with the project. i'll try to keep the thread updated.

[quattrostyle]

What are the costs for a set of those wishbones/control arms? Can imagine there would be some interest in them.

[andy10v]

What are the costs for a set of those wishbones/control arms? Can imagine there would be some interest in them.

$360 each

http://www.034motorsport.com/chassis-components-audi-40008090urq-034motorsport-billet-adjustable-control-arms-audi-small-chassis-p-21822.html

[S2_UD]

I would like to improve the rear brakes (discs and callipers) ...... any ideas/suggestions?

[Rocco]

I would like to improve the rear brakes (discs and callipers) ...... any ideas/suggestions?

Boxter S rears with 300x22 rotors and separate handbrale caliper

[quattrostyle]

Didn't know 034 sells them, but as expected to dear for me.

[S2_UD]

Boxter S rears with 300x22 rotors and separate handbrale caliper

Do you know anyone from where i can buy it? or should i search on my local junk yards?

[S2_UD]

Didn't know 034 sells them, but as expected to dear for me.

The control arms are very well manufactured......worth the money!!
We're thinking in start doing something similar in our shop. If we go ahead with the production i'll tell you our price !!!

[S2_UD]

hi guys.... i'm about to give another push on my project !! i will update with pics soon.
i am buy some new stuff but i would like to remove the distributor and assemble ignition coils....

Can anyone help me with this?? :S

[UrS4boy]

i am buy some new stuff but i would like to remove the distributor and assemble ignition coils.... Can anyone help me with this?? :S

You will need an ABY or AAN ECU and the appropriate harness to make that conversion *AND* someway to make a G40 cam sensor work.

[quattrostyle]

and the appropriate harness

Or do the pin swap as Rocco did.