You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Yes.
Norbitron, nice work with the VEMS setup, I like it alot!
SNP told me there would be complications with the clima if you install it on a regular s2 car, otherwise I would wanted vems for another s2 car as well.
Milled the cam cover to accept the tfsi loom.Glad owner decided not to use 7a cam cover with tfsi coils.
Painted and blasted again.Result was bad.Even i used a product from a supplier i like lots of products it was bad.Do not know why.Maybe ambient temperature,maybe parts temperature,maybe the fact paint was aerosol.Do not know.First it looked good,after flash it got bad.
This time will sand the parts with a da sander after i blasted all again,and will paint using my paint gun.
Nice work!
Are the pistons and conrods from FCP Engineering?
Thx,we do our best to get the client happy,because he invested lots of money and time into this project.
I like your vems setup,looks a very clean work.When we will get to loom will need some diagram with connectors of your loom.
Time for paint.
Sandblasted all rust areas and epoxy applied.
Next: paint interior,and start prep for exterior surfacer that will wait for curing approx 1 week.
Milled the cam cover to accept the tfsi loom.Glad owner decided not to use 7a cam cover with tfsi coils.
Painted and blasted again.Result was bad.Even i used a product from a supplier i like lots of products it was bad.Do not know why.Maybe ambient temperature,maybe parts temperature,maybe the fact paint was aerosol.Do not know.First it looked good,after flash it got bad.
This time will sand the parts with a da sander after i blasted all again,and will paint using my paint gun.
Any engine part should be "baked" to get the oil out of the metal before painting. Some machine shops have ovens just for baking parts.That may be your issue with the paint finish.
HTH, Chris
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
That's a nice and clean car (at least from the pictures i saw). Good luck 
)
Comment