My 93 Audi S2 Avant brilliant black.

[Gimmi]

Fuel tank asembling:



In place. And thanks to irishs2 for the tip about rs4 rear heat shield!







finaly startup, after months without

The engine did not rune clean at load before it got put away, so i had to pull out the coils and whatch:



The "rubber thing that goes from the coil to the plug" thing (my english.... hehe ) had lots of burn marks, so i changed these.

Old to the left:



Tyed to take a better picture in front:

[Gimmi]

Time to fix som leaking. It was leaking on both seals at the side, the one in front was dry:





Old seal out and a littl watch on the diff lock:



New seal on place, at the other side tho



Oil i use:



Ready to mounting. Filled it up with 1.3l oil, and torqued the bolts to the flange with 10 NM + 90 degress

[Gimmi]

Was watching around in the engine bay, and found some stuff to fix. One of the bolts to the wastegate flange was loose:



fix:



Missed a nut on the wastegate:



Fix:



New light switch, and the oem boring steering wheel in to MOT.





Some painting with alumablast:

''

And some engine reving. No exhaust on it!

[Gimmi]

And after 2 weeks in the frezzer, i think it was about time to get them in the subframe Subframe ready to go up on the car:



Wasent easey with alu bushes, buth with these steering tap i finaly got it in place:



Tighted up, 110 nm + 90 degress

[Gimmi]

Sandblasted the last parts:



Painted:



Vacuum actuator and 034 street density bushes:





Diff in the right place:



Some more chassi parts on place:

[Gimmi]

And then was one hell of an update done! hope your not sick of pictures
Also wanna post a new picture of my daily, im realy happy with it:

Wow, awesome work.I am having vivid flashbacks myself looking at your pics.

That kinda rust seems to be normal, but I bet there is more hiding under the underseal.

Are those foam circles around the bumper mounts standard?

Thanks for the nice comments! I really should have stripped the whole car down undernith, but im not gonna do it without my own garage (using dads ATM, hes allready complaning after a couple of months. But ive taken the real bad rust, som im pretty happy!

And yes, i think they are standard. Will probley show up in etka?
got some comments on the "ducktape roll" in the back for the car

[irishs2]

Thats a fantastic amount of work well done, also there can never be enough pictures.

Nice daily.

[Rubberdubber]

Agree, great stuff and pictures always good

[Gimmi]

Thanks guys ! [emoji4] the car is now on wheels ready for MOT tomorow! Ill make an big update after that [emoji4]

[andersg]

Nice job! Where did you buy the white faced VDO boost gauge?

[Veg]

Superb and makes me crack on with my RS2. I have booked it for paint and have ordered suspension inspired by you!

[piotr]

Great stuff buddy