fitting after market ecu

[Albie S2]

Hi

Had enough of this bosch motronic ecu that has limits on everything start to fit new after market system running 60-2 pickup wasted spark coil per cylinder programable ecu.

[Albie S2]

60-2

60-2 wheel fitted to crank

[Albie S2]

new wiring for the ecu

wiring for ecu

[Albie S2]

old system removal

bosch motronic removal

[kwlw]

Keep on going . It is interesting what advantage it will be in terms of HP/NM.

Is your car engine heavily modified ?

Sau

[Albie S2]

collector pics for branch

collector

[Albie S2]

intake manifold

busy building new intake manifold

[Albie S2]

no2

i am going to run 1.8 bar boost with nitrous 150hp and 102 octane racing fuel mix with toulene.

[kwlw]

i am going to run 1.8 bar boost with nitrous 150hp and 102 octane racing fuel mix with toulene.

No more stupid questions like "is your engine modified ?"

It should be fast as hell , keep us informed

Sau

[Albie S2]

progress on intake manifold

intake manifold

[audiman]

What limitations have you come across then? We have never had any on my car

[Albie S2]

limitations

Hi

The thing is u guys are in the right part of the world where you can easiley fit new chips to your ecu"s in South Africa we dont have those privelages so the best thing is to go for something else wich i have experiance in.The thing with the motronic is you can not raise the boost alone without doing the fuel side and you are limit with boost pressure.Nothing wrong with the bosch system dont understand me wrong the only thing is to get somebody to set it up.

cheers

[audiman]

Would it not be cost effective to fly Mihnea over to SA and map a few cars??? It wouldnt be that expensive if a few of you got together.

[puppetman]

busy building new intake manifold

basically i was just wondering wh t the runner size is for the IM. thanks
btw, it all looks good. wish i had $$ too.

[Albie S2]

runner lenght

Hi

yeh the runner lenght will be the same as on the normal 3b and also i try to keep the volume of the i/f to 2.3l approx the same as the engine cc2226.The flow of the intake is not much effected by the sqaure looking intake because you pressurize the system with boost up to 1.8 bar.

Cheers Chris