Announcement

Collapse
No announcement yet.

Return of the beast

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Ok, so didn’t take the 2 hours I was expecting, but the rear subframe, diff, hubs and wishbones are all in and the rear brakes all fitted up. Just need to get the coilovers fitted to finish bolting the stuff together. Rear driveshafts can go back in at the same time and the rear end can be finished off apart from alignment. I have set that by eye for now. Should drive well
    sigpic
    Tom C - www.rcmr.co.uk
    Audi UR Quattro
    Audi 100 C3 2.0 5 cyl 115ps
    Audi S2 - 07k engine project aiming for 800ps
    Audi B5 RS4 645ps 911nm

    Comment


    • #47
      Good progress in this cold weather mate
      91 Modded 3B
      14 A6 Avant Black Edition

      Comment


      • #48
        Originally posted by SteveH View Post
        Good progress in this cold weather mate
        I had the space heater blasting towards me! I ended up in a t shirt! Lol. Workshop must have been 30 degs
        sigpic
        Tom C - www.rcmr.co.uk
        Audi UR Quattro
        Audi 100 C3 2.0 5 cyl 115ps
        Audi S2 - 07k engine project aiming for 800ps
        Audi B5 RS4 645ps 911nm

        Comment


        • #49
          Well, I stripped the steering arms out and found the original rubber bushes looking fairly tired. Error404 is knocking me up some new delrin bushes and I have removed all the adjusters, cleaned the threads, wire brushed and POR15’d the arms ready to fit new bushes and the new track rod ends. Also have a new rack haired to fit as it’s a right PITA to do once the engine is in place!

          things are moving along, just a bit slower than I expected. Still hoping to have it running in May. But this might might be extended until June!!!!!!!
          sigpic
          Tom C - www.rcmr.co.uk
          Audi UR Quattro
          Audi 100 C3 2.0 5 cyl 115ps
          Audi S2 - 07k engine project aiming for 800ps
          Audi B5 RS4 645ps 911nm

          Comment


          • #50
            Progress has been slow again, partly due to me having zero time, but I’m just waiting on parts from various suppliers now.
            Rear suspension is all bolted in. New OEM drop links have arrived also now. Just need to order some new ARB bushes and that will be suspension all finished.
            sigpic
            Tom C - www.rcmr.co.uk
            Audi UR Quattro
            Audi 100 C3 2.0 5 cyl 115ps
            Audi S2 - 07k engine project aiming for 800ps
            Audi B5 RS4 645ps 911nm

            Comment


            • #51


              Custom dials have arrived too
              sigpic
              Tom C - www.rcmr.co.uk
              Audi UR Quattro
              Audi 100 C3 2.0 5 cyl 115ps
              Audi S2 - 07k engine project aiming for 800ps
              Audi B5 RS4 645ps 911nm

              Comment


              • #52
                The dials look good, where did you have them made?
                Greg

                S2Forum.com Administrator & Webmaster

                '93 Coupe with a few tweeks

                Comment


                • #53
                  Xtuners.com
                  Really pleased with the quality, they look exactly the same as the OEM. You can choose loads of different options etc. And these are not just stickers, put proper replacement faces
                  sigpic
                  Tom C - www.rcmr.co.uk
                  Audi UR Quattro
                  Audi 100 C3 2.0 5 cyl 115ps
                  Audi S2 - 07k engine project aiming for 800ps
                  Audi B5 RS4 645ps 911nm

                  Comment


                  • #54
                    You do not have permission to view this gallery.
                    This gallery has 2 photos.
                    sigpic
                    Tom C - www.rcmr.co.uk
                    Audi UR Quattro
                    Audi 100 C3 2.0 5 cyl 115ps
                    Audi S2 - 07k engine project aiming for 800ps
                    Audi B5 RS4 645ps 911nm

                    Comment


                    • #55

                      91 Modded 3B
                      14 A6 Avant Black Edition

                      Comment


                      • #56
                        Braided brake lines arrived yesterday. If it rains today, I will go in and finish fitting the vac servo and brake master cylinder and then fit the brake lines and bleed etc.
                        sigpic
                        Tom C - www.rcmr.co.uk
                        Audi UR Quattro
                        Audi 100 C3 2.0 5 cyl 115ps
                        Audi S2 - 07k engine project aiming for 800ps
                        Audi B5 RS4 645ps 911nm

                        Comment


                        • #57
                          Updates have been ultra slow!!!
                          I got around to finishing fitting the vacuum brake servo setup this weekend. All brake hard lines replaced/modified as necessary, new braided hoses and a full bleed with ATE typ200 brake fluid.
                          I have also given up on fitting the 07k engine for now. Conversion parts have ceased production everywhere, so i now have to wait until someone else gets around to making them.
                          I have purchased an ABY complete which arrives tomorrow, so thats going in with the big intercooler. I have exhaust parts to make a new system and then its pretty much ready for the road again.
                          Hoping to have it running and mapped for ADI (2018!), not with my engine of choice, but running none the less. At least it gives me a chance to give the brakes a workout and suspension to settle etc
                          sigpic
                          Tom C - www.rcmr.co.uk
                          Audi UR Quattro
                          Audi 100 C3 2.0 5 cyl 115ps
                          Audi S2 - 07k engine project aiming for 800ps
                          Audi B5 RS4 645ps 911nm

                          Comment


                          • #58
                            Man sorry to hear , I was really looking forward to seeing this with the 07K since there are so little of those out there . but sounds like progress will be faster this way .

                            Comment


                            • #59
                              I think in the sales there is a conversion kit for sale for 07k

                              Comment


                              • #60
                                Originally posted by rxl View Post
                                I think in the sales there is a conversion kit for sale for 07k
                                I did enquire, but he couldn’t confirm to me if the sump was an early Iroz unit or the late one. Later versions had much bigger oil capacity to prevent failures....
                                sigpic
                                Tom C - www.rcmr.co.uk
                                Audi UR Quattro
                                Audi 100 C3 2.0 5 cyl 115ps
                                Audi S2 - 07k engine project aiming for 800ps
                                Audi B5 RS4 645ps 911nm

                                Comment

                                Working...
                                X