S2/RS2 stainless Steel manifold - High FLOW!!!

[audspeed]

The manifold I will start selling at $700.00. I have few change to make on the downpipe that will be release in few weeks. The downpipe will be arround $375. The turbo is a T04b from Borg Warner. I use T3/T4 Garrett wheel shaft. The turbine housing will be K24-26 or regular T3 with .63 and .82 AR as option. The complete turbo polished will be arround $650.00. The oil/water lines kit arround $100.00. So far $1825.00 you guys will get an complte swap all bolt on able to produce between 400-450hp. Group Buyers !!!

[Technogym]

hmm.. what about egt measuring? nice to have when installing and tuning a Computer based ECU

VM

[s2driveruk]

thats great money, especially given the uk/us exchange rates Now if only I had some money......not much fussed about the bling but the horses.......now thats different

[kwlw]

hmm.. what about egt measuring? nice to have when installing and tuning a Computer based ECU

VM

At least I can see two nuts welded on the right side of the manifold. I suppose they are for EGT sensors

Sau

[raymor]

Audspeed,

Looks top!

have you any pictures of the manifold fitted in situ ? and have you flow bench results that you could post on the forum. i.e RS2 manifold vs your product?

I am interested and the current exchange rate makes it a option if there are no clearance/performance issues.

If you can clarify, that'd be great

thanks
Raymond

[Technogym]

At least I can see two nuts welded on the right side of the manifold. I suppose they are for EGT sensors

Sau

You need egt sensors for each Cylinder, so you know that each cylinder have the same working condition!

VM

[kwlw]

You need egt sensors for each Cylinder, so you know that each cylinder have the same working condition!

VM

Oh my . Can you show me a picture, how it looks like ? As far I have seen EGT probes, there was only one or two on the manifold or downpipe. I cannot imagine five of them .

Sau

[jade]

Looks real good i will be pm you soon

[nos]

Nice work!
What sort of steel are you using and how thick is the steel bends?
Maybe interested..

[audspeed]

It is made by 304 Steel and able hold 500WHP. Warranty by manufacture for 3 months against cracks. The flange to bolt KKK turbo and option for Garrett units

[jade]

Audspeed
How much can you supply a gt30r for ???

[audspeed]

The GT30R if you buy my manifold I can get for $1075

[BosnianS2]

Is that $700 for manifold? If it is i am interested, because i am using K26/T04E turbo on my 3b with stock manifold, because i could not find anythin reasonable priced as far as manifolds, and i know that stock manifold is hurting me big time. I also live in USA so let me know.

[audspeed]

Yes you are right, The stock S2 manifold is very restrictive for power and boost. The new manifold is better in flow, weight and able to produce more power with right tunning. The manifold is made with 2 option flanges. K24/26 or T3 flange. The price will be $700.00 and the downpipe for $375, but is not release yet. I will keep you guys posted.
Thanks

[BosnianS2]

when you get them ready let me know i am definately interested. I have custom 3" turbo back exhaust, and couple days ago pipe cracked close to turbo, so i will probably wait until you get manifold ready, and redo this down pipe also at same time.
looks very good.