WTB - Small brass connector on oem AAN KKK Turbo and small 'S' Pipe

[macspring]

When you look at an oem KKK 7000 turbo from an AAN ( and presumably and S2), apart from the obvious main inlet connection on the front of the turbo, there is a second biro sized 'gold y' coloured connector that is screwed into the turbo, looking for this connector and the small length of pipe that goes from the connector to the N75. The lenght of the pipe is about 5 inches approx.

Hopefully, this ling shows the connector on the turbo.



https://i.ebayimg.com/00/s/MTAyNFg3Njg=/z/HQ0AAOSwYxBaCswn/$_72.JPG


Over the holidays working my way through what's missing from an UrS6 Avant.

Thanks.

[Greg_S]

The fitting on the turbo should be a standard spec I expect so shouldn’t need to be Audi specific. Also the pipe to the n75 could also be done with a suitable diameter piece of silicone hose

[macspring]

Hi Greg,

Agreed, but if someone had a broken KKK they might sell me this piece, and similarly someone parting a car might have the pipe handy.

[Greg_S]

Yeah hopefully you can get the hits you need, I’m sure someone will have them