As above,looking for a fan shroud,to suit aby rad,if I'm right in saying the 3b one is metal that would be preferable as I'll need to modify it to accept a spal fan.
cheers,Adam
cheers,Adam
-
It's a love/hate relationship with the S2,i love it,it hates me
-
Hi , just wondering why are you using a spal fan ? -
I didn't have a stock fan to hand...i had a spal fan lying around in the garage so thought I'd give it a tryIt's a love/hate relationship with the S2,i love it,it hates meComment
-
The stock fan is much more effective then spal fans. Just for info
Comment
-
I've also heard this,I've already mounted the spal with zip ties as a temporary measure,it's holding temp just fine,I am using a 55mm core rad though.
Just need a shroud to finish it off properly,I can always fit a stock fan if I have any problemsIt's a love/hate relationship with the S2,i love it,it hates meComment
-
Great .. i fitted a shroud from another audi model. One hole was not correct .. works for me. The thicker is much better then the thin ones.Comment
-
Add hows your engine swap going?
I have a 3b metal shroud you can have for postage but I am not home for 2 weeks.
I was going to try it with the 12inch Spal fan Part No. 30102038 as it is close to 3b 300w fan at around 280w and a more efficient 5 bladed paddle than the 3 bladed 3b.
Alot of Spal and Ebay fan have not got the power for S2 application but the top of the range ones are in with a shout
Comment
-
Its almost done,just finished up my wiring loom and got the new ECU fitted,running well,just the last few niggles to sort out,I'm not in a mega rush so that would be great
It's a love/hate relationship with the S2,i love it,it hates meComment
-
Pm Sent
Comment
-
Think i'm sorted now,thanks guys
It's a love/hate relationship with the S2,i love it,it hates meComment
Comment