NEED S2 linkage, front subrame, and halfshafts

[hoov]

I am starting my 3B + 01E CGR 6 speed transmission swap into my CQ at the beginning of June and still need these parts asap. Does anyone have these parts available? I'm on the US side of the pond so it is a hassle...

[archiboy24]

No need for the subframe. The stock Cq subframe can be used when fitted with a 28mm spacer for the driver's side gearbox mount.

[4WheelDrifter]

I'm pretty sure you don't need the halfshafts either.

[archiboy24]

I'm pretty sure you don't need the halfshafts either.

The 01E has larger output flanges than the 01A. The easiest thing to do is get RS2 (or 6spd S2) half shafts. The other way is to modify the stock half shafts with larger inner cv joints or to swap out the gearbox flanges for smaller ones. Not sure which flanges work though.

[hoov]

Thanks guys. I picked up the linkage and front subframe anyway (thanks rs2coupe).
I have heard about retrofitting the stock half shafts using 100mm output flanges (which I also have). I'll try and see how it goes.

[rs2coupe]

Thanks guys. I picked up the linkage and front subframe anyway (thanks rs2coupe).
I have heard about retrofitting the stock half shafts using 100mm output flanges (which I also have). I'll try and see how it goes.

glad to help ya out Hoov