Wanted: Power steering pump

[Error404]

easy peasy

two bolts at the top (left if looking from friont of car) on the pivot, then the bolt for the tensioner on the rad side

[Key Walshe]

Looks like GSF & Europarts aren't worth the boxes they come in then? Thanks for the advice, I shall avoid them like I would a Citroen...

I'm monitoring some on eBay, UK and elsewhere, but, I still don't know the part number for the PAS pump - surely someone must know it? I've done a search on here to no avail (perhaps not looking hard enough!) and online and not much use there either...

[s20ale]

Aby Pump No 8G0.145.165 X , As far i i'm aware they are engine code dependant e.g 3b, 7a, aby.

HTH'S

[Key Walshe]

Thank you very much, I have just found another part number whilst searching a little harder in THIS thread which was 035 198 049, which Jas11n says is for the pump, so could that be for a different engine code?


If so, does anyone know the definate code for an Avant, ABY engined PAS pump?

[GT500]

I am waiting for ZF to give me a price/availability, taken some tracking down in there massive organisation.
should have some contact in the next day or so.
I know the pump you want, its the same as mine.

[s20ale]

Here you go, discussed in detail, something to mull over.

http://www.s2forum.com/forum/showthread.php?t=26291

@Rob, good one mate let us know how you get on as i'm in the same boat.

[markrs2]

Thank you very much, I have just found another part number whilst searching a little harder in THIS thread which was 035 198 049, which Jas11n says is for the pump, so could that be for a different engine code?


If so, does anyone know the definate code for an Avant, ABY engined PAS pump?

035 198 049 is the part number for the seals for the old type pumps fitted between 1980 and 1988. As previously stated the pump you want is 8G0 145 165 X and is £417 plus vat exchange from audi. The seal kit for this pump is 035 198 049 A and is £12.03 plus the vat.

[Jas11n]

Thank you very much, I have just found another part number whilst searching a little harder in THIS thread which was 035 198 049, which Jas11n says is for the pump, so could that be for a different engine code?

Ahem I don't quote that number, someone else does and you've missed the "A" off the end which is correct for a full seal kit as I say in that thread.
That thread started by me is just for the cross hatched plug and seal.

is the correct number for the ABY 035 198 049 A

Thats the part number for the whole pump.

Meaning a seal kit for the whole pump. Thread is about seals not the whole PAS pump itself.

Jas..

[Key Walshe]

My mistake, sorry Jas

And thanks for the code numbers, that'll make it much easier to find one now.

And thanks s20ale, good read on that topic, very helpful!

[Key Walshe]

Just found THIS item on eBay with the description:


REMOVED FROM 94 AUDI 80 COUPE

PART NUMBERS FROM PUMP AS FOLLOWS

8691 955 153

0111708 3.93

054 145 165K 100


The first 3 digits of the part number differ from the one that's listed for an S2, but, would it fit an S2 Avant ABY?

[GT500]

Just found THIS item on eBay with the description:


REMOVED FROM 94 AUDI 80 COUPE

PART NUMBERS FROM PUMP AS FOLLOWS

8691 955 153

0111708 3.93

054 145 165K 100


The first 3 digits of the part number differ from the one that's listed for an S2, but, would it fit an S2 Avant ABY?

There goes the chance of a cheap one

ZF are bloody slow to deal with, I will chase them up on monday.

[Key Walshe]

You reckon that could be a worthwhile bid then? Or would the money put into that and effort getting it to fit be better spent on one that will definately fit, even if it costs more?

[GT500]

Don't know, part numbers don't match. Not a good start.
Shame ZF haven't got back to me yet. They have our pump listed so should be able to supply.

[Key Walshe]

I've just been offered an S2 PAS pump from a 3b for £70, I'd guess that should be ok or atleast fixable onto an ABY engine? They can't be that different, can they?

But, I have found THIS thread which contains this quote by saltinot

I've got the brackets from both 7A and ABY/ADU in the garage. The 7A/3B/ABY/ADU pumps will all fit in either bracket. However, you'll find that the ABY style bracket will not work with the 7A/3B setup.

Somewhere during production the pumps changed slightly. They went from using a sealing washer(early style) to an O-ring(later style), along with a banjo bolt, for attaching the hydraulic lines. This might explain the difference in the numbers. Physically the pumps are very similar.

So, this is the issue it seems, will this fot an ABY! According to the above, no, but if I were to et the 3b bracket aswell, would that fit an ABY without any issues? This problem is started to drive me crazy

[GT500]

Its the different sealing washer types thats the difference. Ok if you have the correct banjo bolts for pump.

Good fun int it!

Try the peage part first!