Part No needed.

[s20ale]

The pump that you will need is 8G0 145 165X, and this will cost you about £490 inc vat from your local Audi stealer. Oh and this is for an exchange item, hence the X on the end of the part number

...OOOH it won't be from a stealer on sireee.

[4WheelDrifter]

Thanks alot guys, i guess yours is most recent then 4Wheeldrifter, will go with that one.

No. I looked on the old version. We got there in the end.

[s20ale]

Anyone know if 3b or 7a hydraulic pumps are same as Aby.
I know the carriers (brackets) are different but are pumps the same.
Suppose part No's would tell, i don't have access to that info ie ETKA.

[terrybullwon]

Anyone know if 3b or 7a hydraulic pumps are same as Aby.
I know the carriers (brackets) are different but are pumps the same.
Suppose part No's would tell, i don't have access to that info ie ETKA.

Try here Vagcat

[s20ale]

Try here Vagcat

Thanks James but Vagcat telling me server down, been like it for 2-3 days now.
Or is it just me.

[4WheelDrifter]

Anyone know if 3b or 7a hydraulic pumps are same as Aby.
I know the carriers (brackets) are different but are pumps the same.
Suppose part No's would tell, i don't have access to that info ie ETKA.

See my original post.

Mine shows 054 145 165 K for 'M' chassis and onwards, so that includes all ABYs. X is for exchange of course.

Sometimes the most up-to-date information isn't the best, especially when you are looking for 2nd hand parts.

[spink]

Thanks James but Vagcat telling me server down, been like it for 2-3 days now.
Or is it just me.

Not just you,it seems to be like that quite a lot.

[s20ale]

Anyone know if 3b or 7a hydraulic pumps are same as Aby.
I know the carriers (brackets) are different but are pumps the same.
Suppose part No's would tell, i don't have access to that info ie ETKA.

Anyone know the answer to above question as Vagparts server still down.
Appreciate your help guys.

[saltinot]

Anyone know if 3b or 7a hydraulic pumps are same as Aby.
I know the carriers (brackets) are different but are pumps the same.
Suppose part No's would tell, i don't have access to that info ie ETKA.

Try this.....



Let me know if it's not what you're looking for.

[s20ale]

Ahh thanks Saltinot have both sets of prints & they all show the same pt No apart from first 3 digits, could this refer to carrier brackets or do you think a 3b would not be compatible with aby?.
This seems to be getting a bit deep now, Hope i can get this sorted as car sitting on friends drive with a huge oil slick under it ( pump let go & pump to bomb hose split @ 12 midnight last Tuesday) and wants it shifted by xmas.
Any ideas anyone, someone must have had same problem in the past.

[saltinot]

You're welcome.

I've got the brackets from both 7A and ABY/ADU in the garage. The 7A/3B/ABY/ADU pumps will all fit in either bracket. However, you'll find that the ABY style bracket will not work with the 7A/3B setup.

Somewhere during production the pumps changed slightly. They went from using a sealing washer(early style) to an O-ring(later style), along with a banjo bolt, for attaching the hydraulic lines. This might explain the difference in the numbers. Physically the pumps are very similar.

[s20ale]

Thanks saltinot , your input has been most helpfull, so to summit all up then i need an aby pump, Hey ho the search continues for blasted pump then.
thuoght i was on to a winner with the 3b pump.

Dear santa........ no i'm not spending £450 on a new one.

[GT500]

I have just had this crappy job to sort on mine.
I only changed the pump because It made a noise, I'm off skiing in it and didn't want it puking its oil out on the way!
I too will not pay £450 for a part that makes no difference to engine BHP!
So I got one through wab, from Europarts. fitted it and it lasted 20 miles and spunked its guts out all over my nice clean engine= Not happy!
Orderd one from G&S £110- £40 surcharge. Looks identicale to europarts one. So far so good! 40 miles.
Both pumps were new, not reconned.

I told you that red shiit comes back to get you!

[s20ale]

I have just had this crappy job to sort on mine.
I only changed the pump because It made a noise, I'm off skiing in it and didn't want it puking its oil out on the way!
I too will not pay £450 for a part that makes no difference to engine BHP!
So I got one through wab, from Europarts. fitted it and it lasted 20 miles and spunked its guts out all over my nice clean engine= Not happy!
Orderd one from G&S £110- £40 surcharge. Looks identicale to europarts one. So far so good! 40 miles.
Both pumps were new, not reconned.

I told you that red shiit comes back to get you!

Aaagh tell me about it kin people only have to read top of filler res & it tells you there & having green cap should give a clue!!.

£110 for new thats good value, where is g&s?

[GT500]

G&S= German and Swedish!